GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: rtb51 on 19 May 2009, 13:33
-
Considering fitting a Milltek to my 2.0 and it looks like as well as fitting the 4Motion rear valance, you also have to cut away some metalwork behind the valance. Is this just on the twin pipe system or is it for all Millteks ?
I'm not really happy to do this, so has anybody fitted a similar system that doesn't need the car to be hacked about ?
-
had my anni cat back fitted a couple of wks ago, my mate tom fitted it and was a straight swap from waht i culd see, only thin i did was have a anni rear valance fitted
-
Considering fitting a Milltek to my 2.0 and it looks like as well as fitting the 4Motion rear valance, you also have to cut away some metalwork behind the valance. Is this just on the twin pipe system or is it for all Millteks ?
I'm not really happy to do this, so has anybody fitted a similar system that doesn't need the car to be hacked about ?
only the 4mo style exhaust - its only a small piece of metal and does not affect the structrual integrity of the car
-
had my anni cat back fitted a couple of wks ago, my mate tom fitted it and was a straight swap from waht i culd see, only thin i did was have a anni rear valance fitted
Where did you buy yours from stink ?
-
had my anni cat back fitted a couple of wks ago, my mate tom fitted it and was a straight swap from waht i culd see, only thin i did was have a anni rear valance fitted
Where did you buy yours from stink ?
bought it from JBS autodesign as part of a group buy on uk-mkivs, catback delivered £280 :smiley:
-
Good price, well done mate it looks spot on :cool:
Gonna get mine done when i've got some cash again cos i'll need the rear valance too
BALLZ just found out that they don't do em for Tdi :angry:
-
Hi, i have done these mods recently.
I used a grinder to cut the small amount of metal from the bolt holder. the 4motion valance was a bit of a git to get on, just because of the excellent VW fit.
Honestly Milltek cat back on my 2.0 8v sounds fantastic and the fit is second to none, mine is the twin tailpiece.
well worth it, :cool:
email me if you need any pics or advice :cool:
-
Good price, well done mate it looks spot on :cool:
Gonna get mine done when i've got some cash again cos i'll need the rear valance too
BALLZ just found out that they don't do em for Tdi :angry:
What dont they do for a TDI :huh: Its all the same pipe work :wink:
-
Considering fitting a Milltek to my 2.0 and it looks like as well as fitting the 4Motion rear valance, you also have to cut away some metalwork behind the valance. Is this just on the twin pipe system or is it for all Millteks ?
I'm not really happy to do this, so has anybody fitted a similar system that doesn't need the car to be hacked about ?
You don't have to cut it away, you could bend it upwards out of the way like I did, then you can always bend it back down if you need to, at a later date. :afro:
-
Good price, well done mate it looks spot on :cool:
Gonna get mine done when i've got some cash again cos i'll need the rear valance too
BALLZ just found out that they don't do em for Tdi :angry:
What dont they do for a TDI :huh: Its all the same pipe work :wink:
Oh ?
I just looked on the milltek website and it doesnt list the Anni zorst ? I don't think :undecided:
-
Good price, well done mate it looks spot on :cool:
Gonna get mine done when i've got some cash again cos i'll need the rear valance too
BALLZ just found out that they don't do em for Tdi :angry:
What dont they do for a TDI :huh: Its all the same pipe work :wink:
Oh ?
I just looked on the milltek website and it doesnt list the Anni zorst ? I don't think :undecided:
The 1.8T 4Mo style system is the same part number as the TDi so the Anni 1.8T one will fit the diesel :afro:
Neil
-
Ahh rite cheers Neil :wink:
-
Excellent info.
Thanks guys.
-
got myself a milltek discrete cat back couple weeks ago, no cutting of anything required! :smiley: sounds the nuts!