GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: Winso on 18 May 2009, 09:45
-
Quick question... on a KR lump is it the high or low pressure sensor that's at the front of the oil cooler?
Mine's sprung a leak!
-
the white one is high pressure, brown/black/blue low pressure
-
Thanks!
Mines white so must be the high pressure.
Just looking at GSF and I'm a bit confused.
93447 OIL PRES SWITCH VW/AUDI PETROL ENGS 98> 1 PIN BLACK(1.2>1.6 BAR) 4.50
Is this the right one? Although it says 'black' it is the highest pressure one there.
-
good question, i think i've got mine mixed up. if some on could tell us the senors position and the wire colurs that'll be nice. :wink:
-
no thats not the one, its 1.8bar. non of the mk2 ones have a colour listed except one listed as blue, so better off going in there and askin. though personally id rather use a 2nd hand VW than a new GSF one, heard the pressure switches in particular arnt very good!
edit: white sensor has a yellow wire, blue/brown/black has a blue wire.
-
edit: white sensor has a yellow wire, blue/brown/black has a blue wire.
sweet nice one!