GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: skem55 on 13 May 2009, 20:33

Title: door hinge pins?
Post by: skem55 on 13 May 2009, 20:33
ne one have an approach to changing these? f**kin little kunts wont come out of the hinge! lol

stuart
Title: Re: door hinge pins?
Post by: 16vLeroy on 13 May 2009, 22:10
You mean the little suckers with the 10mm nut underneath?

Close the door half way, then knock 'em out with a hammer.  :wink:
Title: Re: door hinge pins?
Post by: skem55 on 13 May 2009, 22:12
no 10mm nuts just the pin, ill not get the beating stick in there with the door half shut lol
Title: Re: door hinge pins?
Post by: 16vLeroy on 13 May 2009, 22:17
I find that closing the door 'slightly', makes it 'slightly' easier.

Hammer - it's the tool of a pikey, but it gets the job done!
Title: Re: door hinge pins?
Post by: skem55 on 14 May 2009, 00:22
I find that closing the door 'slightly', makes it 'slightly' easier.

Hammer - it's the tool of a pikey, but it gets the job done!

guessin in the up direction?

stuart
Title: Re: door hinge pins?
Post by: antogoof on 14 May 2009, 00:39
yeah and they are a nightmare to get out, watch out though i changed 2 on my old 3 door and its the hinge that was worn and needed replacing :smiley:
Title: Re: door hinge pins?
Post by: Thom89 on 14 May 2009, 01:02
Your old pins are worn! and are hung up on the hinges..
Unbolt and remove the door, pins should now come out relatively easy, as they are no longer under tension, knock the top pin upwards, and the bottom pin, downwards, use, plenty of WD40 to help, lubricate new pins with copperslip...
Tom