GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: tobybrennan on 12 May 2009, 13:19
-
whats a good mod on a mk3 golf, for around £80?
-
Spend it on Tampons, this thread is asking for anal rape
-
Depends what your after... Style or speed? For £80 speed aint gunna happen, but you could get a nice backbox with a bit of grunt, or a K&N Pannel filter. Mabey a pannel filter and a good service, probably the best power gains you will see without spending massive ammounts of money :smiley:
-
alright cheers:)
-
New set of speakers?
Vr6 splitter (copy of) - BMW 1 series rear wiper - aero wipers?
save up for some coilovers?
-
vr6 splitter sounds good:)
-
mk4 flat type front wiper blades, 1 series rear wiper upgrade.
http://cgi.ebay.co.uk/Genuine-VW-Golf-Bora-Lupo-RetroFit-Aero-Wiper-Blades_W0QQitemZ360092869839QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item360092869839&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A0%7C293%3A3%7C294%3A50
-
save it for when it breaks :wink:
-
save it for when it breaks :wink:
:grin: Buy relays
-
£80 could get you some coilovers. Do it!
-
£80 could get you some coilovers. Do it!
shagged, hottuning ones :grin:
-
£80 could get you some coilovers. Do it!
shagged, hottuning ones :grin:
Less of that.
-
get your car breathing and running right if it isn't already
K&N panel filter
oil change
new plugs
decent HT leads
-
did the oil change today, and brought some new plugs too
and an oil filter, cant get the bloody thing off though:)
-
did the oil change today, and brought some new plugs too
and an oil filter, cant get the bloody thing off though:)
what are you using to get the oil fitler off?
For panel filter, id get a pipercross one, its what im using, and its what rtechuk recommended to me.
-
For panel filter, id get a pipercross one, its what im using, and its what rtechuk recommended to me.
+1 sounds nice aswell.
-
if you can get a set of coilovers for 80. count me in :laugh:
-
if you can get a set of coilovers for 80. count me in :laugh:
Ebay
did the oil change today, and brought some new plugs too
and an oil filter, cant get the bloody thing off though:)
Stab a screw driver into it, and then use that to lever it off.
-
if you can get a set of coilovers for 80. count me in :laugh:
Ebay
did the oil change today, and brought some new plugs too
and an oil filter, cant get the bloody thing off though:)
Stab a screw driver into it, and then use that to lever it off.
thats how i got my filter off on the mk2 :laugh: ghetto but works a treat.
-
if you can get a set of coilovers for 80. count me in :laugh:
Ebay
did the oil change today, and brought some new plugs too
and an oil filter, cant get the bloody thing off though:)
Stab a screw driver into it, and then use that to lever it off.
thats how i got my filter off on the mk2 :laugh: ghetto but works a treat.
Does the job when your in a tight spot, as you cant grip it that well. I do have remover thing, but its basically just a belt that grips it. Not as good as stabbing it.
-
I Used a large G clamp on my valver.
The filter sat in the 'cup' of the G and clamp was screwed up tight to grip/wedge the filter. Had to do do this as there's not enough room to swing the proverbial cat let alone a hammer enough to get the screw driver in :angry:
But if there is enough space a screwdriver works like a charm.
-
yeah i tried using a belt grip thing, didnt work
i'll just jam a screwdriver into it, see if it workss!!:)
-
tbh m8 uve had loads of replies, but no1 has had the common sense to ask what have you done to ur car already?? :smug: ave you got pics?? least give us an idea what we have to work with. :undecided:
-
I use my trusted leather belt to get the oil filter off :laugh:
-
not done anything to the car yet, standard, just trying to get it to run a lot nicer before i mod it