GolfGTIforum.co.uk

General => The garage => Topic started by: king nu2 turbo on 10 May 2009, 14:53

Title: Falut Needs Rectifing Before i Get A Remap
Post by: king nu2 turbo on 10 May 2009, 14:53
Hi

I wanna get my 2001 1.8t AUM engine Remapped. However since i've owned the car its had a re-occouring fault.
The code is 16725 , Camshaftpos sensor plausible signal.
Ive had the camshaft changed, MAF replace and had a cambelt kit fitted (inclding damper).
After each part was replaced the codes were cleared. It drove better but about 8 miles later it came back on now lacks power again
would you guys be able to help me out
i live in essex but work in london

Thnks
Title: Re: Falut Needs Rectifing Before i Get A Remap
Post by: Rhyso on 10 May 2009, 17:24
has no one replaced the camshaft position sensor?? that would have been the first thing to replace if its the thing giving the code!
Title: Re: Falut Needs Rectifing Before i Get A Remap
Post by: king nu2 turbo on 10 May 2009, 21:54
Yeah Sorry i havent had camshaft changed, i ment position sensor
Title: Re: Falut Needs Rectifing Before i Get A Remap
Post by: Rhyso on 11 May 2009, 07:55
Yeah Sorry i havent had camshaft changed, i ment position sensor

ah right was going to say!!  hmm have you had the wiring checked out?
Title: Re: Falut Needs Rectifing Before i Get A Remap
Post by: king nu2 turbo on 11 May 2009, 21:31
i havent check the wires yet. However i had another good check of the engine today, i found a broken pipe under my intake manifold. I replaced this and  :grin:
feels like i have alot more power again. didnt have enough time to clear the e.m.l but will clear it tommorrow. fingers crossed

ive got a forge 007p on its way would feel any difference in the drive fitting this alone