GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: Steve_B on 13 April 2009, 18:26
-
When I got a new head recently the fuel rail and injectors came with it. The fuel rail has the same part number but the injectors are different. The ones I was using are yellow and the other ones are blue! As you can see from the picture, they are different lengths
(http://i72.photobucket.com/albums/i199/SteveB007/DSC00118.jpg)
Yellow 037906031A
Blue 037906031C
Anyone know which ones are right for a 88 8v digifant?
Also, does it make much of a difference getting them cleaned? Is it worth the £40 or whatever it'll cost?
cheers
Steve
-
Going on what i read in dave walkers workshop in ppc mag cleaning them makes them flow more equally but actually slightly reduces the flow from them
I tried both the part numbers in etka but none of them came up
Just had a quick look on etka, part numbers for a 88 pb fuel injector are listed as
037906031P
This then supercedes to
037906031R
-
Hi
Are the part numbers Bosch.
-
Hi
Are the part numbers Bosch.
Can't see Bosch written on them anywhere and they have what looks like the VAG logo on them (it's feckin tiny though, might be wrong :smiley: )
-
I reckon you want the yellow ones. Those are the PB ones I pulled out of the GTI head I ran on carbs.
-
both are PB injectors, use whichever look best I suppose, or use your old ones if they're known good
Volkswagen MK2 digifant = 191.8cc/min, Bosch 0 280 150 757, VW 037 906 031A
Volkswagen MK2 digifant = 197 or 218.1cc/min?, Bosch 0 280 150 902, VW 037 906 031C
-
Cheers guys, will stick with the yellow ones then :smiley: Strongly suspect they've seen a lot less miles than the other ones anyway.