GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: andc1 on 12 April 2009, 21:20
-
hi all, need to change my bushes underneath soon, are they compression fit or are they simple push in style?
cheers
-
which bushes?
-
not to sure yet, everytime i go over a bump i get a loose sound feeling if that makes sense
-
not to sure yet, everytime i go over a bump i get a loose sound feeling if that makes sense
front or rear??
fronts could be wishbone or anti-roll bar
rear will be the rear beam bushes
-
front, its not the top mounts, are the compression fittings or a hammer job?!!! :grin:
-
Got to press them in, or buy complete wishbones from ebay for £45 :wink:
-
easier to buy new wishbones then? bushes cant be that much to buy
-
http://cgi.ebay.co.uk/AUDI-A3-OCTAVIA-GOLF-BORA-SUSPENSION-WISHBONE-ARMS-X-2_W0QQitemZ220265950349QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item220265950349&_trksid=p3286.c0.m14&_trkparms=72%3A1689%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318
i've just odered those and i'll be getting the Audi TT bushes pressed into them
-
yea ive just looked at those! just bolt back on then i take it?
-
yea ive just looked at those! just bolt back on then i take it?
yep - i'll probably order some new bolts too - not sure if those are one use or stretch bolts and if i'm going to the trouble of getting them replaced i'll replace the bolts too :smiley:
-
sounds easier than pressing new bushes in, not the sort of thing you cam do at home i suppose is it!
-
sounds easier than pressing new bushes in, not the sort of thing you cam do at home i suppose is it!
as i found out with the rear beam bushes :rolleyes: :lipsrsealed:
-
when i bought my car the rear sub frame bushes were on their way out so i got them replaced straight away, but i must say it is a really awkward job you have to have a special tool and compress them in tightening with a spanner thanks