GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: bratty on 12 April 2009, 21:19

Title: gearbox advice
Post by: bratty on 12 April 2009, 21:19

think i might have found myself a reasonable box but the gearbox needs 2 x push in driveshaft flanges as they are missing, now obviously i must have these on the gearbox i have in it allready, are they difficult to swop over???

can i just purchase new ones??

Title: Re: gearbox advice
Post by: rubjonny on 13 April 2009, 08:47

vr6 box right? looking at etka they're held in with a bolt thru the middle of the flange, so should be dead easy!  should replace the flange seals really, if you get me the transmission code i can find out the part number, will cost 8-10+VAT each depending on the size you need

Title: Re: gearbox advice
Post by: bratty on 13 April 2009, 08:56

sweet ill roll the beast out the garage this morning see if i can see the code :)

Title: Re: gearbox advice
Post by: bratty on 13 April 2009, 14:36

ok just dragged her out her house..

only numbers that i could see are : CCM 15 063 14 0249

that sound rite??

Title: Re: gearbox advice
Post by: GUAVR6 on 13 April 2009, 14:59

there is no problem usin the one that you already had in the other gearbox, but if you can get the new ones that well be better. Half year ago my brother did the same thing on his geo and it still working

Title: Re: gearbox advice
Post by: bratty on 13 April 2009, 15:01

cool. i think ill still look into getting new ones in case i have any trouble with removing the ones off my old box, i have a short temper and dont wanna be smashing up my mates work shop :)

Title: Re: gearbox advice
Post by: bratty on 14 April 2009, 11:35

johnny did u get a chance to look the code up m8?

Title: Re: gearbox advice
Post by: rubjonny on 14 April 2009, 13:21

02A 301 189 - 8.86+VAT x2 :)

the actual flanges are
02A 409 355 A - 78+VAT each if you wanted new ones

Title: Re: gearbox advice
Post by: bratty on 14 April 2009, 13:24

cheers brother mucho appreciato :)

Title: Re: gearbox advice
Post by: bratty on 14 April 2009, 15:31

jonny is mine OBD2 ?

Title: Re: gearbox advice
Post by: rubjonny on 14 April 2009, 15:46

i have no idea sorry  :grin:

Title: Re: gearbox advice
Post by: bratty on 14 April 2009, 15:52

me neither LOL