GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: dai-cymru on 18 February 2009, 16:57
-
16622/P0238/000568
From Ross-Tech Wiki
Jump to: navigation, search
Contents [hide]
1 16622/P0238/000568 - Manifold Pressure/Boost Sensor (G31): Signal too High
1.1 Possible Symptoms
1.2 Possible Causes
1.3 Possible Solutions
right got this fault code 16622/P0238/000568 - Manifold Pressure/Boost Sensor (G31): Signal too High
Possible Symptoms
Malfunction Indicator Lamp (MIL) active
Possible Causes
Wiring/Connector(s) from/to Manifold Pressure/Boost Sensor (G31) faulty
Manifold Pressure/Boost Sensor (G31) faulty
Possible Solutions
Check Wiring/Connector(s) from/to Manifold Pressure/Boost Sensor (G31)
Check Manifold Pressure/Boost Sensor (G31)
anyone know how much the sensors are and where i can get one from or where i can get a wiring diagram as we had to wire this sensor into the ecu loom ourselves anyone had this sensor fail and know symptoms? mine is running quite rich by the smells and is very low on power
-
Map sensor?
http://forums.vwvortex.com/zerothread?id=4244323
-
Map sensor?
http://forums.vwvortex.com/zerothread?id=4244323
mmmm thought it was the one on the inlet manifold, need rhys to connect vag com up again unplug the intercooler plug an see if the code says open circuit cheers rich :afro:
oh rhyso...........................where art thou my little plug in guru
-
Map sensor?
http://forums.vwvortex.com/zerothread?id=4244323
mmmm thought it was the one on the inlet manifold, need rhys to connect vag com up again unplug the intercooler plug an see if the code says open circuit cheers rich :afro:
oh rhyso...........................where art thou my little plug in guru
sat at home drooling over my new wheels :laugh: :laugh:
where and when bud :afro:
-
Map sensor?
http://forums.vwvortex.com/zerothread?id=4244323
mmmm thought it was the one on the inlet manifold, need rhys to connect vag com up again unplug the intercooler plug an see if the code says open circuit cheers rich :afro:
oh rhyso...........................where art thou my little plug in guru
sat at home drooling over my new wheels :laugh: :laugh:
where and when bud :afro:
1pm tommorow?
-
Map sensor?
http://forums.vwvortex.com/zerothread?id=4244323
mmmm thought it was the one on the inlet manifold, need rhys to connect vag com up again unplug the intercooler plug an see if the code says open circuit cheers rich :afro:
oh rhyso...........................where art thou my little plug in guru
sat at home drooling over my new wheels :laugh: :laugh:
where and when bud :afro:
1pm tommorow?
meet me in work then? :smiley:
-
Map sensor?
http://forums.vwvortex.com/zerothread?id=4244323
mmmm thought it was the one on the inlet manifold, need rhys to connect vag com up again unplug the intercooler plug an see if the code says open circuit cheers rich :afro:
oh rhyso...........................where art thou my little plug in guru
sat at home drooling over my new wheels :laugh: :laugh:
where and when bud :afro:
1pm tommorow?
meet me in work then? :smiley:
thats what i was wondering if it is the intercooler map sensor then it shouldnt effect the running so pointing at the TIP
-
Map sensor?
http://forums.vwvortex.com/zerothread?id=4244323
mmmm thought it was the one on the inlet manifold, need rhys to connect vag com up again unplug the intercooler plug an see if the code says open circuit cheers rich :afro:
oh rhyso...........................where art thou my little plug in guru
sat at home drooling over my new wheels :laugh: :laugh:
where and when bud :afro:
1pm tommorow?
meet me in work then? :smiley:
thats what i was wondering if it is the intercooler map sensor then it shouldnt effect the running so pointing at the TIP
no worries mate - i'll pack my VAGCOM cable and laptop and see what we can find tomorrow :smiley:
-
Map sensor?
http://forums.vwvortex.com/zerothread?id=4244323
mmmm thought it was the one on the inlet manifold, need rhys to connect vag com up again unplug the intercooler plug an see if the code says open circuit cheers rich :afro:
oh rhyso...........................where art thou my little plug in guru
sat at home drooling over my new wheels :laugh: :laugh:
where and when bud :afro:
1pm tommorow?
meet me in work then? :smiley:
thats what i was wondering if it is the intercooler map sensor then it shouldnt effect the running so pointing at the TIP
no worries mate - i'll pack my VAGCOM cable and laptop and see what we can find tomorrow :smiley:
ta mate hope rich's find is right and it's the intercooler sensor :smiley:
-
ta mate hope rich's find is right and it's the intercooler sensor :smiley:
no worries :smiley:
if he's wrong we can lynch him when he visits week after next :evil: :grin: :grin: :grin:
-
ta mate hope rich's find is right and it's the intercooler sensor :smiley:
no worries :smiley:
if he's wrong we can lynch him when he visits week after next :evil: :grin: :grin: :grin:
lol :cry: If im right Rhys you have to fit the TIP for dai - using only axle stands :laugh: :grin: :evil:
-
ta mate hope rich's find is right and it's the intercooler sensor :smiley:
no worries :smiley:
if he's wrong we can lynch him when he visits week after next :evil: :grin: :grin: :grin:
lol :cry: If im right Rhys you have to fit the TIP for dai - using only axle stands :laugh: :grin: :evil:
lol i got a large set of axle stands in work mate - in the form of 4 poster lifts :grin: :grin: should be a doddle :laugh: :laugh:
-
ta mate hope rich's find is right and it's the intercooler sensor :smiley:
no worries :smiley:
if he's wrong we can lynch him when he visits week after next :evil: :grin: :grin: :grin:
lol :cry: If im right Rhys you have to fit the TIP for dai - using only axle stands :laugh: :grin: :evil:
lol i got a large set of axle stands in work mate - in the form of 4 poster lifts :grin: :grin: should be a doddle :laugh: :laugh:
Cheat :grin: :grin: :grin:
-
ta mate hope rich's find is right and it's the intercooler sensor :smiley:
no worries :smiley:
if he's wrong we can lynch him when he visits week after next :evil: :grin: :grin: :grin:
lol :cry: If im right Rhys you have to fit the TIP for dai - using only axle stands :laugh: :grin: :evil:
lol i got a large set of axle stands in work mate - in the form of 4 poster lifts :grin: :grin: should be a doddle :laugh: :laugh:
Cheat :grin: :grin: :grin:
you didn't specify the exact type of axle stands i could use :tongue: :grin: :grin:
-
ta mate hope rich's find is right and it's the intercooler sensor :smiley:
no worries :smiley:
if he's wrong we can lynch him when he visits week after next :evil: :grin: :grin: :grin:
lol :cry: If im right Rhys you have to fit the TIP for dai - using only axle stands :laugh: :grin: :evil:
lol i got a large set of axle stands in work mate - in the form of 4 poster lifts :grin: :grin: should be a doddle :laugh: :laugh:
Cheat :grin: :grin: :grin:
you didn't specify the exact type of axle stands i could use :tongue: :grin: :grin:
Damm Rhys 1 Rich 0
:cry: :grin: :grin: :laugh:
-
thats fine as long as i dont have to do it :grin:
-
ta mate hope rich's find is right and it's the intercooler sensor :smiley:
no worries :smiley:
if he's wrong we can lynch him when he visits week after next :evil: :grin: :grin: :grin:
lol :cry: If im right Rhys you have to fit the TIP for dai - using only axle stands :laugh: :grin: :evil:
lol i got a large set of axle stands in work mate - in the form of 4 poster lifts :grin: :grin: should be a doddle :laugh: :laugh:
Cheat :grin: :grin: :grin:
you didn't specify the exact type of axle stands i could use :tongue: :grin: :grin:
i heard a saying once,
"all the gear no idea" :wink:
-
thats fine as long as i dont have to do it :grin:
lol :laugh:
-
i heard a saying once,
"all the gear no idea" :wink:
well i've got no gear but i do have an idea - you fit it :grin: :grin:
-
i heard a saying once,
"all the gear no idea" :wink:
well i've got no gear but i do have an idea - you fit it :grin: :grin:
pmsl :laugh: :laugh: