GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: jamrock on 10 February 2009, 20:03

Title: mk2 16v wiring loom.
Post by: jamrock on 10 February 2009, 20:03

i am after an engine wiring loom and ECU for my converted 16v.

it was orignally an 8v and has been converted. the problem is that it was not done to a great standard and i am having a few problems.

i have been told to track down the wiring loom and ecu for a golf 16v, which i have done. can anyone please advise if there is anything else i should be also looking for??

i was also told that there would be two ECU's. not sure about that as i thought there is only one.

any help would be greatly appreciated, thanks

Title: Re: mk2 16v wiring loom.
Post by: monzablue16v on 10 February 2009, 20:09

ECU, Ignition amplifier bolted to the top and the ISV control unit which is usually behind the centre console. :)