GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: M4VERICK on 10 February 2009, 13:21
-
Engine Management light has come on and have taken it to garage and they have informed me that the throttle body needs replacing. Part alone is about £300 + about an hours labour.
Is a second hand throttle body an option or should that be avoided?? Moving house at the moment so i need a cheap fix really. Is it ok to leave... not to bothered about the reduced acceleration to much??
Thanks in advance!
-
what code?
-
what code?
Code as in VAG Code?? Not sure, but he's a golf specialist and has assured me that the TB needs replacing. I asked him if it could be cleaned and he just said no. He said the voltages that are coming out of it are all wrong making the acceleration jerky.
I've no idea about cars, hence the post on here :rolleyes:
-
Just find one of an old car and fit it yourself. You could probably get it done quite cheaply.
-
Just find one of an old car and fit it yourself. You could probably get it done quite cheaply.
Just found one on a breaker website for £100 which is pretty reasonable.... usual 3 mnt guarantee... may think about getting that one :undecided:
If anyone has any tips as to how to fit it myself that would be greatly appreciated!
-
what code?
Think he was reffering to you engine code :smiley: you can find it on the left hand side of your engine actually just look above the throttle boddy and you shoudl see 3 letters stamped in the metal
-
what code?
Think he was reffering to you engine code :smiley: you can find it on the left hand side of your engine actually just look above the throttle boddy and you shoudl see 3 letters stamped in the metal
Ah... Its an AUM Engine!
-
Just find one of an old car and fit it yourself. You could probably get it done quite cheaply.
Just found one on a breaker website for £100 which is pretty reasonable.... usual 3 mnt guarantee... may think about getting that one :undecided:
If anyone has any tips as to how to fit it myself that would be greatly appreciated!
go and look at the one on there. You remove a hose and 3 bolts I think..
-
Or i've found this one on ebay... sounds good coming from an 02 engine. Would it be the same engine code?? Mines a 2001 (Y)
http://cgi.ebay.co.uk/2002-VW-GOLF-1-8-TURBO-THROTTLE-BODY_W0QQitemZ380102260585QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item380102260585&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318 (http://cgi.ebay.co.uk/2002-VW-GOLF-1-8-TURBO-THROTTLE-BODY_W0QQitemZ380102260585QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item380102260585&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318)
-
I would check with VW first, I was quoted £150 last year would not have thought it would have gone up that much. If you look at the throttle body clean for the removal should not take you long. 4 allen bolts and a jubilee clip. Also the electrical connector.
-
Yeah cleaned mine on Sunday, it took me all of 10 mins to remove it. Four allen bolts and a couple of jubilee clips for hoses.
-
very very easy job if you was to do it yourself.
even a someone with minimal skills could do it in a hour :smiley:
ian
-
Just get the one from eBay and give it a go yourself.
-
Ony thing with ebay is that if there is an intermitent fault on it you may not find out until the warrenty is up.
-
More than likely the lower stop not met & adaption wont rest... I fiex one today by tapping it as the ignition was turned on and off... Technical stuff aye..
Nick
-
More than likely the lower stop not met & adaption wont rest... I fiex one today by tapping it as the ignition was turned on and off... Technical stuff aye..
Nick
didthe trick tho :grin: :afro:
-
Thanks for all the advice as usual!
I managed to get one off ebay for £19.95.... it has supposedly come off an Audi TT with only 5K engine use (not too sure about that).
Anyway. Once i have fitted it, which i am going to try and do myself does anything need doing on VAG??? Cos i dont have that.
Thanks again
-
me and matt cleaned mine at the weekend. Was black inside ha. Mine is a Aum and it didnt need recoded after we cleaned it. Just reassembled it and turned ignition to 2nd click waited a bit then turned over fine
-
look here this how to is for cleaning but it will defo help you in removing your throttle body an easy job mate http://www.golfgtiforum.co.uk/index.php?topic=87783.0 (http://www.golfgtiforum.co.uk/index.php?topic=87783.0) hth