GolfGTIforum.co.uk

General => Car audio => Topic started by: andykgolf4 on 05 February 2009, 16:03

Title: HELP ** Power wire from bat to boot for mk4
Post by: andykgolf4 on 05 February 2009, 16:03

Hi all,

im a new mk 4 owner. had a leon cupra before. got a gt tdi 115 now.

Any way, im needing some help installing my ice

where can i get a power wire through the bult head.  im planning on running it down the passenger side of the car.

cheers

Title: Re: HELP ** Power wire from bat to boot for mk4
Post by: T_J_G on 05 February 2009, 17:09

Somewhere underneath te passenger glove box I've been told.

Title: Re: HELP ** Power wire from bat to boot for mk4
Post by: troublestarter on 05 February 2009, 17:10

you need to remove the passenger side scuttle panel
the glove box and centre console
when you have removed the glove box pull the material that is in front of you to one side and look up to the left there is a grommet there that comes out behind the pollen filter behind the scuttle panel
take out the grommet chop a hole in it and then put it back in then feed a wire coat hanger through and tape your power cable to it and pull it through

Title: Re: HELP ** Power wire from bat to boot for mk4
Post by: andykgolf4 on 05 February 2009, 17:58

cheers mate will have a look in the light tomorrow.
might be daft ...
whats a scuttle panel???   im laughing to my self here cos it prob obvious    but i dont know.

have any of you guys come up with a way of installing a mdf boot floor but so you can still get at the spare.
i usually put hinges at the back so when the seats are folded down the boot floor lifts up and the spare is there.
any beter ways??