GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: boldy147 on 01 February 2009, 16:25
-
My hazzards only flash one side , i have checked bulbs and all ok , so assume its the wiring but i cannot get my head around the haynes manual . can someone please help thanks
-
id say its likely to be the hazard switch itself, or a loose connection to the switch stalk (depending if its pre/post 90)
-
Hazards relay?? :undecided:
-
no there is only 1 relay output which powers both sides, so its not that. problem has to be in the switch itself. if its a pre-90 the switch is seperate from the stalks, if its a post 90 its built in.
-
Mine was a loose wire on the back of the switch, caused it to flash one side and not the other.