GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: Skiing on 13 January 2009, 12:55

Title: Replacing bypass valves with hoses as matrix done (Mk3) - are these right ones?
Post by: Skiing on 13 January 2009, 12:55

Just wanted to check these are the right hoses for my 16v to replace the bypass valves - the matrix has been replaced with the MK3 one so I know its fine to do so...

Are these the rights parts - just wanted to check.


18004B  HEATER HOSE(FEED)   G2 16V 2/86 >10/91     11.50   1   Delete 

--------------------------------------------------------------------------------
 
18005  HEATER HOSE (RETURN)   G2 16V 2/86 >7/89     9.45   1   Delete

Title: Re: Replacing bypass valves with hoses as matrix done (Mk3) - are these right ones?
Post by: Skiing on 13 January 2009, 13:00

Just to clarify, the matrix has been replaced with a Mk3 one - it's not a Mk3 golf!

Title: Re: Replacing bypass valves with hoses as matrix done (Mk3) - are these right ones?
Post by: VeeDubGTI16v on 13 January 2009, 13:16

the part numbers are in rubjonnys etka post, have a look through there

Title: Re: Replacing bypass valves with hoses as matrix done (Mk3) - are these right ones?
Post by: Skiing on 13 January 2009, 13:53

Found it - thanks v much, sorry thought EKTA was VW only so didnt look in thread for GSF numbers...