GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Golf mk2 gallery => Topic started by: jv on 08 January 2009, 13:28

Title: seamud - vr6 turbo
Post by: jv on 08 January 2009, 13:28: :)
Title: Re: seamud - vr6 turbo
Post by: seamud on 08 January 2009, 22:11: ive owned my golf for 4 yrs got her cheap 300 notes with an over heating problem 5er later she was sorted
new pressure cap on expansion bottle :laugh:
laste year the dreaded grott set in to the door and tailgate
looked on flea bay scrap yards every fecking where for medium blue
bit the bullet told the missus she ant getting a her tits done gonna splash the cash on my baby :evil:
interior wings tailgate doors all in the skip
back to flea bay sourced solid doors and tailgate new wings and rear quater panels new slam panel
whilst this was happening my mate spanked his vento vr6 backwards into a ditch
600 notes later my backyards looking like a scrap yard :grin:
engine come out of golf that wk
few mates round wheeled vr6 out of vento changed head gasket and put spacer gasket in, clutch, cam chain, tensioners
and wheeled it in to mk2 could not beleave how easy it was
even the wiring was plug and play had her started in two days :laugh:
now the bugs realy kicked in now
changed hubs on rear to 5 stud
(http://i362.photobucket.com/albums/oo64/seamud2/DSCI0024.jpg)[/img]
Title: Re: seamud - vr6 turbo
Post by: seamud on 08 January 2009, 22:22: thought id do something with the tailgate
back to fleabay sourced caddy tailgate cut volkswagon out and welded into place
wanted to be different to smooth and flush
then made the bat wings to go over lights
lead filled vw badge holder at rear welded plate for door handles lead filled again
exhauset is pissed bodged it on for mo so i can move car about
(http://i362.photobucket.com/albums/oo64/seamud2/DSCI0006.jpg)
Title: Re: seamud - vr6 turbo
Post by: seamud on 08 January 2009, 22:24: happich windows i love them got the electric motors for them wire them up when i get to the
interior(http://i362.photobucket.com/albums/oo64/seamud2/DSCI0019.jpg)
Title: Re: seamud - vr6 turbo
Post by: seamud on 08 January 2009, 22:26: just got my wheels back from refurb couldnt resist putting them on see what they look like(http://i362.photobucket.com/albums/oo64/seamud2/DSCI0001.jpg)
Title: Re: seamud - vr6 turbo
Post by: seamud on 08 January 2009, 22:43: got recaro electric front seats and seat leon rear seats being re trimed
not sure to go carbon fibre door cards or leather ill wait on that one
turbo kits been ordered should get next couple of wks
should run bout 300bhp when running :grin:
started to wire sound system got apline multimedia sat nav tv dvd multi disc
alpine graphic equaliser, 2 12insch subs 4 amps, 2 caps, 3 arials put them in roof lining
feck me what a head ache all worth it in the end
Title: Re: seamud - vr6 turbo
Post by: seamud on 02 April 2009, 23:41: (http://i362.photobucket.com/albums/oo64/seamud2/seamus2084.jpg) work has now started to put turbo in of come head re built head with new valves, stem seals,skimmed and fast road cams. port and polished air manifold head spacer gasket garrat 360 degree turbo, screamer pipe and a gotec pro plus ecu with wiring loom should be good for around 380 bhp(http://i362.photobucket.com/albums/oo64/seamud2/seamus2086.jpg)(http://i362.photobucket.com/albums/oo64/seamud2/seamus2087.jpg)(http://i362.photobucket.com/albums/oo64/seamud2/seamus2090.jpg)(http://i362.photobucket.com/albums/oo64/seamud2/seamus2093.jpg)(http://i362.photobucket.com/albums/oo64/seamud2/seamus2094.jpg)(http://i362.photobucket.com/albums/oo64/seamud2/seamus2089.jpg)
Title: Re: seamud - vr6 turbo
Post by: seamud on 02 April 2009, 23:53: (http://i362.photobucket.com/albums/oo64/seamud2/seamus2092.jpg)
Title: Re: seamud - vr6 turbo
Post by: seamud on 03 April 2009, 00:01: (http://i362.photobucket.com/albums/oo64/seamud2/seamus2085.jpg)
Title: Re: seamud - vr6 turbo
Post by: seamud on 29 August 2009, 16:11: hi folks bout time i updated on my project. things been going bit slow due to money fooking credit crunch lol.[img(http://i266.photobucket.com/albums/ii271/seamud1/s-1.jpg)][/img]
first promlem fitting intercooler had to cut away all lower front valance and side if light holders to fit 600mm by 300m by 76mm thick inter cooler trusty angle grinder worked wounders :grin: which now lead to secound problem :cry:(http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/09012008087.jpg)[/img] rad now dosnt fit out comes the grinder again(http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/c.jpg)[/img] and now she fits on to next problem lol
running 76mm induction pipes which works well upto throttle housing gunna have to run throttle body upside down due to hitting side of turbo which ant to much of a problem thank god(http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/y.jpg)(http://i266.photobucket.com/albums/ii271/seamud1/u.jpg)[img(http://i266.photobucket.com/albums/ii271/seamud1/h.jpg)(http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/g.jpg)[/img]][/img][/img] just waiting for extra intercooler parts then can complete. just ordered 13 row oil cool and sandwich plate so that should b an easy fit. waiting for wiring loom for ecu to be made this car is breaking the bank :cry: [img(http://i266.photobucket.com/albums/ii271/seamud1/e.jpg)][/img] starting to look good i think any comments welcome[img(http://i266.photobucket.com/albums/ii271/seamud1/l.jpg)][/img] exhaust fitted stainless steel power flow 475 notes.
Title: Re: seamud - vr6 turbo
Post by: seamud on 29 August 2009, 16:13: (http://i266.photobucket.com/albums/ii271/seamud1/09012008087.jpg)(http://)(http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/c.jpg)[/img]
Title: Re: seamud - vr6 turbo
Post by: seamud on 29 August 2009, 16:15: (http://i266.photobucket.com/albums/ii271/seamud1/c.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 14 January 2010, 12:19: (http://[IMG]http://i362.photobucket.com/albums/oo64/seamud2/GetAttachment-1.jpg)[/img]
tarox discs fitted nice n easy
(http://[IMG]http://i362.photobucket.com/albums/oo64/seamud2/G.jpg)[/img]
(http://[IMG]http://i362.photobucket.com/albums/oo64/seamud2/4.jpg)[/img]
starting to get ricky 76mm boost pipes
(http://[IMG]http://i362.photobucket.com/albums/oo64/seamud2/22346_1245961921717_1609479765_3063.jpg)[/img]
(http://[IMG]http://i362.photobucket.com/albums/oo64/seamud2/22346_1245961921717_1609479765_3063.jpg)[/img]
waitng for 440cc injectors oil plugs leads
need a vr6 corrado rad if any one knows or got one for sale please pm me cant find rad anywhere cash waiting!!!!!
Title: Re: seamud - vr6 turbo
Post by: seamud on 14 January 2010, 12:26: [i(http://i362.photobucket.com/albums/oo64/seamud2/GetAttachment-1.jpg)mg][/img]
[im(http://i362.photobucket.com/albums/oo64/seamud2/G.jpg)g][/img]
(http://i362.photobucket.com/albums/oo64/seamud2/4.jpg)(http://)
[i(http://i362.photobucket.com/albums/oo64/seamud2/22346_1245961921717_1609479765_3063.jpg)mg][/img]
(http://)(http://i362.photobucket.com/albums/oo64/seamud2/22346_1245960601684_1609479765_3063.jpg)
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 June 2010, 23:11: made a f**k up coz of size of intercooler had barley any room to fit corrado rad so had to strip front end down again
and drop lower rad support by 2 inches to allow to fit standered vr6 rad(http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike059.jpg)[/img]
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 June 2010, 23:11: (http://)(http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike059.jpg)
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 June 2010, 23:12: (http://)(http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike058.jpg)
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 June 2010, 23:15: had to mod intake manifold as throttle bodie was rubbing side of turbo
(http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike050.jpg)[/img]
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 June 2010, 23:15: (http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike050.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 June 2010, 23:16: (http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike049.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 June 2010, 23:25: oil cooler and housing was a lucky find of an ldv turbo van few mods and fitted perfectley under intercooler couldnt find camera at time to take sum pics not quite finnished yet
modified slam panel made intercooler part of slam
running 3/4 oil cooler hoses wot a f**kin pain in the arse to fit sandwich plate with the hoses
(http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike068.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 June 2010, 23:27: (http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike067.jpg)
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 June 2010, 23:29: (http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike039.jpg)(http://)
heat wraped the exhaust 15meters used
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 June 2010, 23:31: (http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike043.jpg)(http://)
(http://i266.photobucket.com/albums/ii271/seamud1/cr/carnbike042.jpg)(http://)
rear head rest to go on seats
Title: Re: seamud - vr6 turbo
Post by: seamud on 01 March 2011, 23:04: (http://i266.photobucket.com/albums/ii271/seamud1/01032011288.jpg)(http://)
bout time i made inlet manifold look a bit better
cleaned here up ready for a alloy plate to be welded on
Title: Re: seamud - vr6 turbo
Post by: seamud on 01 March 2011, 23:09: (http://i266.photobucket.com/albums/ii271/seamud1/01032011289.jpg)(http://)
pre heating plate and manifold cold day and plus welding with mig so wanna make sure done as much as i can to get a good decent weld
Title: Re: seamud - vr6 turbo
Post by: seamud on 01 March 2011, 23:13: (http://i266.photobucket.com/albums/ii271/seamud1/01032011292.jpg)(http://)
made plug welds on on front of manifold want a nice clean look to front edge and plan is weld all around the sides and dress up with grinder
Title: Re: seamud - vr6 turbo
Post by: seamud on 01 March 2011, 23:15: (http://i266.photobucket.com/albums/ii271/seamud1/08022011285.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 01 March 2011, 23:31: http://s266.photobucket.com/albums/ii271/seamud1/?action=view&current=08022011018.mp4
its running thank fook :smiley:
plumbed the waste gate into vacum to see wot sounds like
this video bout 3 rd time starting engine sounds bit noisy
sounds sweet now :laugh:
got 3 inch maf comin this week and some bosch red tops
chip ecu for now just want it on the road then look and fitting stand alone ecu ive got
at a later date
Title: Re: seamud - vr6 turbo
Post by: seamud on 18 March 2011, 23:04: (http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/18032011304.jpg)[/img]
start to see wot needs to b done to fit strutt brace
this side fits no problem
Title: Re: seamud - vr6 turbo
Post by: seamud on 18 March 2011, 23:05: (http://i266.photobucket.com/albums/ii271/seamud1/18032011304.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 18 March 2011, 23:11: (http://i266.photobucket.com/albums/ii271/seamud1/18032011303.jpg)(http://)
this side ant so good hits top of turbo and brake resvour
plan this wkend is plenty of heat round where hits turbo and beat with hammer :grin:
cut weld on strutt move along plate by bout half inch
also gunna use strutt brace as oil catch tank got no room to fit oil tank
see wot happens :smiley:
Title: Re: seamud - vr6 turbo
Post by: seamud on 18 March 2011, 23:13: (http://i266.photobucket.com/albums/ii271/seamud1/18032011302.jpg)(http://)
with plate on starting to look bit more tider question is wot colour to powder coat
Title: Re: seamud - vr6 turbo
Post by: seamud on 21 March 2011, 10:27: (http://i266.photobucket.com/albums/ii271/seamud1/20032011313.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 21 March 2011, 10:28: (http://i266.photobucket.com/albums/ii271/seamud1/20032011314.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 21 March 2011, 10:28: (http://i266.photobucket.com/albums/ii271/seamud1/20032011312.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 24 March 2011, 10:53: (http://i266.photobucket.com/albums/ii271/seamud1/23032011316.jpg)(http://)
strating to make template for scuttle tray
running to much of the loom through scuttle for standered item to fit
Title: Re: seamud - vr6 turbo
Post by: seamud on 24 March 2011, 10:56: (http://i266.photobucket.com/albums/ii271/seamud1/23032011317.jpg)(http://)
basic cut out wernt to hard to do just making it fit right now the problem with all the slight curves and bends :sick:
Title: Re: seamud - vr6 turbo
Post by: seamud on 24 March 2011, 10:58: (http://i266.photobucket.com/albums/ii271/seamud1/23032011319.jpg)(http://)
finaly got to fit good loads of fooking around once powder coated should look good i hope
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 May 2011, 11:22: (http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/28052011351.jpg)[/img]
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 May 2011, 11:23: (http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/28052011351.jpg)[/img]
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 May 2011, 11:24: (http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/28052011351.jpg)[/img]
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 May 2011, 11:24: (http://i266.photobucket.com/albums/ii271/seamud1/28052011351.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 30 May 2011, 11:32: (http://i266.photobucket.com/albums/ii271/seamud1/th_22052011022.jpg) (http://s266.photobucket.com/albums/ii271/seamud1/?action=view&current=22052011022.mp4)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 10 November 2011, 17:26: (http://[IMG]http://i266.photobucket.com/albums/ii271/seamud1/101120113901.jpg)[/img]
Just brought these ceres 16" wheels (ant to sure about the gold look yet see if grows on me)
cars now running on gotech ecu been converted to msd coilpacks with 440cc injecters
lost my phone wth all pictures will pissed off about it :sick:
ill get some more pictures up at the wkend
Title: Re: seamud - vr6 turbo
Post by: seamud on 10 November 2011, 17:27: (http://i266.photobucket.com/albums/ii271/seamud1/101120113901.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 18 November 2011, 19:43: (http://i266.photobucket.com/albums/ii271/seamud1/18112011393.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 18 November 2011, 19:45: (http://i266.photobucket.com/albums/ii271/seamud1/18112011391.jpg)(http://)
Title: Re: seamud - vr6 turbo
Post by: seamud on 19 November 2011, 16:44: (http://i266.photobucket.com/albums/ii271/seamud1/rear.jpg)(http://)