GolfGTIforum.co.uk

Model specific boards => Golf mk5 => Topic started by: WhiteGTI on 18 December 2008, 07:15

Title: Bonnet and roof vinyl done!!!!!!!!! - Updated :-)
Post by: WhiteGTI on 18 December 2008, 07:15
See below pic  :smiley: :smiley:

Not really a great pic, but best I could do in the short space of time I've had tonight. I MUST stress, that as with all photos, it really does not do it justice at all!

Car is not finished yet. Still awaiting my new sticker numberplate which will be positioned under the near-side headlight (therefore I can get the maximum effect from the black bonnet, through the continued gloss black on the grille!)

Also awaiting the lamin-x tinted headlight film from the USA! Then, the front will look niiiiiiice!

Cheers,
Chris.
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: Rollini on 18 December 2008, 10:09
looks awesome!!  :cool: :cool: :cool:

not sure about the number plate plan but need to see a pic i guess. i would have thought the black and white of the numberplate in its original position would have kinda matched the contrast of the black and white of the rest of the car but still its looks very cool and i don't think i'll be getting your motor mixed up with any other white gti's i see in bracknell.

oh princess square car park for the pic?? looks familar but i can't quite place the location.

Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: Pirelli_P on 18 December 2008, 10:59
Yeh thats decent! I rate that!
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: Hurdy on 18 December 2008, 11:41
That looks gorgeous :drool:

Now you need to lower it to finish the look :cool:
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: prepree on 18 December 2008, 13:04
i love this look, maybe even some black BBS 19" with white lips. AWESOME
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: stealthwolf on 18 December 2008, 13:46
Did you line it up with the bonnet creases or the grille? Can't tell in that pic.

Very nice!

If I had a CW, I'd do that.
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: joesgti on 18 December 2008, 14:46
looks sweet pal!!  :cool: :cool:

i got the laminx stuff from the uk supplier, volksdevil and came next day, was about 20 quid, havnt fitted it yet thow as my bonnet catch is broken so cant lift my bonnet.

that looks good thow! cant wait to see it on the 1st at the pod :afro:
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: T_J_G on 18 December 2008, 15:43
Looks sweet!
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: LaserBlue on 18 December 2008, 18:03
looks marvellous.. :cool:

im too waiting on some lamin-x for my headlamps

what tint did you go for?
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: Saint Steve on 18 December 2008, 21:29
ok, is that a black car now with white sides or a white car with a black bonnet and roof :laugh:

Certainly stands out chris, look foward to seeing it in the flesh tuesday  :smiley:
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: WhiteGTI on 18 December 2008, 21:50
Thanks for the comments all! I am very very happy with the outcome!

looks awesome!!  :cool: :cool: :cool:

oh princess square car park for the pic?? looks familar but i can't quite place the location.

Thanks Rollini.........still CANT believe that we haven't seen eachother around!!!!!!!!!!!! And yep...Princess Square! It has nice white lighting, so the photos come out well  :smiley:

That looks gorgeous :drool:

Now you need to lower it to finish the look :cool:

Lowering is next on the list!  :smiley: :smiley:

i love this look, maybe even some black BBS 19" with white lips. AWESOME

Thanks for your PM - I'll reply in 2mins!  :smiley:

Did you line it up with the bonnet creases or the grille? Can't tell in that pic.

Very nice!

If I had a CW, I'd do that.

Lined it up with the grille! And im 100% glad I did it that way, i think it just 'flows' perfectly!

looks sweet pal!!  :cool: :cool:

i got the laminx stuff from the uk supplier, volksdevil and came next day, was about 20 quid, havnt fitted it yet thow as my bonnet catch is broken so cant lift my bonnet.

that looks good thow! cant wait to see it on the 1st at the pod :afro:

Cheers Joe, ordered mine from the US about three weeks ago, and it came this morning! So will hopefully fit it either on the weekend, or next week!

looks marvellous.. :cool:

im too waiting on some lamin-x for my headlamps

what tint did you go for?

I ordered from the US, and chose the 'tint' version. Spoke to some guys on the S3 forum who have ordered the same stuff, and they said that a darker tint was just too dark  :undecided: :undecided: I would actually have preferred it to be darker the better, but i saw some pics of the 'tint' and it looked plenty dark enough. But i would like to see a darker tint at some point to compare! Which tint did you order???

ok, is that a black car now with white sides or a white car with a black bonnet and roof :laugh:

Certainly stands out chris, look foward to seeing it in the flesh Tuesday  :smiley:

Haha, thanks Steve!  See you on Tuesday!  :smiley: :smiley:

Chris.
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: Steve_PD on 18 December 2008, 22:07
Looks awesome  :cool:
Defiantly needs slamming and black ch's  :smiley:
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: WhiteGTI on 18 December 2008, 22:11
Looks awesome  :cool:
Defiantly needs slamming and black ch's  :smiley:

lol, tell me about it!!! Its going to be a long couple of months before I get the suspension!! :) :)
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: ...joe on 18 December 2008, 22:24
looks awesome. like it alot!
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: LaserBlue on 19 December 2008, 20:06
hey i purchased the tint aswell.. the darker version does look a little to dark

i choose the pre-cut ones.. didnt fancy cutting them to shape lol
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: WhiteGTI on 19 December 2008, 21:20
hey i purchased the tint aswell.. the darker version does look a little to dark

i choose the pre-cut ones.. didnt fancy cutting them to shape lol

Snap!! I too, did not fancy trying to cut it to shape! I would have failed miserably!!! :)
Title: Re: Bonnet and roof vinyl done!!!!!!!!!
Post by: WhiteGTI on 26 December 2008, 18:12
More pics....

(http://farm4.static.flickr.com/3293/3138900384_8d641b4dbc_b.jpg)

(http://farm4.static.flickr.com/3235/3138898274_41a88a3289_b.jpg)

(http://farm4.static.flickr.com/3214/3138897024_13c44b635c_b.jpg)

(http://farm4.static.flickr.com/3181/3138067541_8f98088d75_b.jpg)

(http://farm4.static.flickr.com/3260/3138894128_a14c230f18_b.jpg)

Bit of a shame that I haven't managed to put the Lamin-X headlight tinting film on yet - I'm waiting for hotter weather, as I think it's too cold for it to go on properly at the moment.

And don't worry - A US spec smooth front mask is in the pipeline! As is coilovers, WALK, ARB's and uprated engine mounts!

Thanks for looking  :smiley: :smiley:
Title: Re: Bonnet and roof vinyl done!!!!!!!!! - Updated :-)
Post by: MarkS on 26 December 2008, 18:42
Really like that mate  :cool:
What coilovers you going for?
Title: Re: Bonnet and roof vinyl done!!!!!!!!! - Updated :-)
Post by: WhiteGTI on 26 December 2008, 18:47
Really like that mate  :cool:
What coilovers you going for?

Thanks Mark!

Hmm dunno yet, haven't really thought about it! All I know is that I need them, lol!

Will consider the good makes, like Eibach, H&R, KW, FK, Koni etc... budget isn't massive for them, but will definitely not get the cheapest I can find. Suspension is an important factor, and I don't think it's right to buy it with a tight budget!
 :smiley: :smiley:

Title: Re: Bonnet and roof vinyl done!!!!!!!!! - Updated :-)
Post by: Steve_PD on 26 December 2008, 19:31
Really like that mate  :cool:
What coilovers you going for?

Thanks Mark!

Hmm dunno yet, haven't really thought about it! All I know is that I need them, lol!

Will consider the good makes, like Eibach, H&R, KW, FK, Koni etc... budget isn't massive for them, but will definitely not get the cheapest I can find. Suspension is an important factor, and I don't think it's right to buy it with a tight budget!
 :smiley: :smiley:



Looks awesome, makes me want a mk5 even more  :cool:

with regards to coilovers have a look at weitec, their made by KW but are more mid ranged price wise
Title: Re: Bonnet and roof vinyl done!!!!!!!!! - Updated :-)
Post by: MarkS on 26 December 2008, 19:31
Nice one!
I think quite a few people use KW on here don't they?
Gonna look awesome when it's lowered :)
Title: Re: Bonnet and roof vinyl done!!!!!!!!! - Updated :-)
Post by: WhiteGTI on 26 December 2008, 19:34
Nice one!
I think quite a few people use KW on here don't they?
Gonna look awesome when it's lowered :)

Yeah you're right...KW seems to be the popular choice! Think my budget will only stretch to the Variant 1's, however they do not offer adjustable damping - which is a feature that I would like. So I think I may either look to another brand, or to save up for the Variant 2's !!!  :smiley: