GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: k4ith on 16 December 2008, 18:29

Title: Floor Grommets
Post by: k4ith on 16 December 2008, 18:29

My car came back from the welders with a new ventilation hole :grin:. I have been told its a grommet hole - you can see the top of it in the bottom left hand side under the hole. Now why is it there? and how can i fill the fecker so as i dont have a flintstones car( think about it :wink:) any advice much appreciated.
(http://i39.photobucket.com/albums/e170/b44fy/IMG_0552.jpg)

Title: Re: Floor Grommets
Post by: jacko16v on 16 December 2008, 18:34

The two mk2's i've had have both had this, either bung it with a rubber bung or weld a plate over it and then under seal it.

Title: Re: Floor Grommets
Post by: JC on 16 December 2008, 22:27

that should be a round hole


as per

(http://i427.photobucket.com/albums/pp359/chuffs69/DSCF2538.jpg)

only way you can cure that will be as stated, a plate welded in and a good rust proof then underseal  :wink: