How to fit a Buzzer relay with OEM Mount to a late 92 GTI With CE2 Fuse box..
Quick Fit Wiring Note;
When Using Relay No 292 With Seat Relay Holder. Gives Of an Alternating Buzzer Sound!
Door Contact Switch Mk2 Brown White - Brown Red on Relay Holder To Relay Pin 85. Earth.
Rear Lights - Wires Grey Red (F/B Pin K2) & Grey Black (F/B Pin K3) to Relay Pins 58 L & R. Live.
Black Yellow on Relay Holder To Relay Pin 86. Don't Connect.
Update According To RJ - the extra pin should be live when the key is in the ignition, i.e. the buzzer only goes off with door open and ignition switched off. This is so if you sit there with lights on and ign off, you don't get annoyed by a buzzer when someone gets in/out
1st I picked this Seat no 292 Buzzer Relay up from my Local Scrappy.. This Relay has A 2 tone sound... The VW No36 Relay has the same pin number & layout so may work will test one... But this is a single tone sound and does not come with the relay mount...
Yes It Does Work!!Disconnect the Battery Before Starting...
Remove the drivers side under tray - Just undo 5 screws...
Fuse box should look like this...
Remove fuse box by twisting the white peg on the left hand side round to the front and pull it off.. Then Flex out the left side bracket to release the top locking pin..
Should now look something like this...
Twist it upside down
Locate the black wire block K 1st (Rear Wiring Harness) on the Right... Push the black bit between the wire harness to be able to release the blocks.. It's like a Child Proof Lock and stops the blocks working loose...
Now Sctochlock the Grey/Red Wire (K2 Pin Rear Parking Lights) to the matching wire on the Relay holder or pin 58 on the relay. Do the same with the Grey/Black Wire (K3 Pin Rear Parking Lights), Same pin no 58 on the relay.
Now find the White/Brown wire that connects to the driver's door interior light switch... I took the door switch off and traced the wire by pulling it to see which moved next to the door wiring... Connect to Pin No 85 On the relay.
Clip in the relay and attach the mount to the top of the fuse box...
Job Done.....
But it all back together in reverse order...
Footnote...
I know this relay has 4 pins and according to the wiring diagram for the No36 relay you need a switched live From Block H1 to pin 86.
RJ Says This About This Pin.... The extra pin should be live when the key is in the ignition, i.e. the buzzer only goes off with door open and key out of ignition. this is so if you sit there with lights on and ign off, you don't get annoyed by a buzzer when someone gets in/out
Took me an hour to find/sort this out....