Author Topic: Pressure plate failure on a VR6/G60 kit?  (Read 185 times)

Offline Ed Modenna

  • Just got here
  • *
  • Posts: 1
Pressure plate failure on a VR6/G60 kit?
« on: 04 August 2022, 21:24 »
I installed a clutch on my car today, it has 130,000 miles or more, and all of a sudden the transmission won't come out of neutral. After fiddling with it, I found I could start it with the clutch down and the transmission in gear, foot off the brake, and the car would advance through the starter until the engine had enough speed to start. It was making a slight tick, but I limped away. When the clutch was removed, this is what I found.