Author Topic: heater problems  (Read 1737 times)

Offline moffatt1990

  • Not said much yet
  • **
  • Posts: 18
heater problems
« on: 08 November 2010, 18:59 »
hi i have a 1.8 mk3 golf driver   my heaters are not blowing hot i have been told to check the heater controle valve but i cant find anything that resembles one can anybody help me locate it or have any other ideas of the problem im prity sure its not the thermostat as car gets to temp fine and dose not over heat i have bled the system so its not a clog

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: heater problems
« Reply #1 on: 09 November 2010, 09:08 »
Air lock or blocked matrix I would guess

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: heater problems
« Reply #2 on: 09 November 2010, 12:16 »
no heater control valve on a mk3, coolant passes thru matrix at all times. check coolant level as a first step. does the heater knob feel liek it has resistance behind it and/or can you hear the flap move inside the airbox
Hello my name is John and I'm a dub addict.

Offline moffatt1990

  • Not said much yet
  • **
  • Posts: 18
Re: heater problems
« Reply #3 on: 14 November 2010, 14:19 »
coolant level is fine no airlock or blockage as ts been flushed and es the nob dost have resistance and can hear it there is a verry slight difrance in temp aswel

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: heater problems
« Reply #4 on: 15 November 2010, 11:52 »
sounds liek you need another matrix, its possible the warm air flap has broken down as well, over time the foam falls off and you're left with a metal flap with 3 big holes in it
Hello my name is John and I'm a dub addict.

Offline moffatt1990

  • Not said much yet
  • **
  • Posts: 18
Re: heater problems
« Reply #5 on: 18 November 2010, 12:43 »
thanks for your help i have had bits of foam come from the blowers is the flap easy to get to ?

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: heater problems
« Reply #6 on: 18 November 2010, 13:24 »
takes the same amount of work as a heater matrix swap unfortunatly :(
Hello my name is John and I'm a dub addict.

Offline moffatt1990

  • Not said much yet
  • **
  • Posts: 18
Re: heater problems
« Reply #7 on: 18 November 2010, 18:27 »
i have just removed my heater matrix the flap is fine and the matrix is fine to the best of my knolage (how would i know its not working) iv atached it to a house tap and water flows threw fine it heats up a lil (i asume only a little as it was a house tap ) im stumped an dot want to put the dash back in to find it is the matrix

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: heater problems
« Reply #8 on: 19 November 2010, 10:28 »
matrix could still be partially clogged, best to buy a new one anyway while its all apart. if that still doesnt help then its gotta be waterpump or stat fault?
http://www.golfgtiforum.co.uk/index.php?topic=106380.0
Hello my name is John and I'm a dub addict.