GolfGTIforum.co.uk
General => Car audio => Topic started by: 1 Lp on 02 February 2006, 18:46
-
HI can anyone tell me how wire up a flashing led to my alarm (toad Ai606). I've already got the standard one in, just wanted to add aother.
-
just pull your existing l,e,d out, and jump it from those wires...... :wink:
-
Basically, just chop into one of the 2 wires that goes into the existing LED. Add your new wire to the chop, and put your new LED on the other end. You have to put them in series... And if you put your new LED on the wrong way, it won't work - but you won't break anything, just turn it round...
-
also, your existing led power source could be 12v, so if your just putting a normal standard led to it, you may need a resistor putting in the live....