well i was supposed to be giving myself the day off the car to warm miself back thru, but instead couldn't leave it alone, so first i tidied my shed up, as it looked like a bomb had dropped on it, then i sanded the end of the drivers sill down, where i'd skimmed it over, then i started doing the number plate recess, i got that filled and sanded, and left it with the 2k stopper to be final sanded, then decided i'd do 1 of the mirror blanking plates.
so i got a spare mirror, stripped the black rubber coating of the base, then got the disc cutter in action, once it was cut away, i cleaned it up, and drilled a few holes around the outside of the gap...
like this....
theen i cut a template out of ally bridging mesh, and glassed it to the back of the hole, making sure the fibreglass oozed thru the holes i'd drilled, then flipped it over and gave a quick skim to the other side....
like so....
then after a sanding flat, and a coat of filler and another sanding session, i gave it a coat of primer, and it looks like this......
now, just need to do the whole process again, on the other side......
