GolfGTIforum.co.uk

Model specific boards => Golf mk6 => Golf mk6 how to guides + info => Topic started by: branchespark on 20 January 2011, 12:34

Title: HOW TO: Check your version of RNS510
Post by: branchespark on 20 January 2011, 12:34
Hi all,

I have tried to search, but don't seem to know how one can tell what software is installed on the RNS510? On my Audi RNS-E, there is a page that tells you the software and the DVD installed, but even VAG-COM does not seem to report that I need to know!

Thanks,

Sam
Title: Re: Check version of RNS510
Post by: mr gee on 23 January 2011, 05:32
press the 'set up' button for about 30 secs or more, it will scroll through 2 frames before reaching the 'hidden menu' page. This is mine on the firmware page.


(http://img.photobucket.com/albums/v237/gerardleesgp/Golf%20VI/P03-09-09_2046.jpg)
Title: Re: Check version of RNS510
Post by: branchespark on 23 January 2011, 18:54
I have version 7074. :(

(http://dl.dropbox.com/u/8035571/forums/www.golfgtiforum.co.uk/IMG_1630.jpg)
Title: Re: Check version of RNS510
Post by: branchespark on 23 January 2011, 19:13
Updated firmware to 2760:

(http://dl.dropbox.com/u/8035571/forums/www.golfgtiforum.co.uk/IMG_1626.jpg)

Thing is, on a cold boot, I get the SWL message, although it does still boot:

(http://dl.dropbox.com/u/8035571/forums/www.golfgtiforum.co.uk/IMG_1632.jpg)
Title: Re: Check version of RNS510
Post by: branchespark on 23 January 2011, 19:44
Sorry. Think this was down to me doing the three button restart (not a cold boot) and, hence, putting it in to SWL mode!

:rolleyes:
Title: Re: HOW TO: Check your version of RNS510
Post by: Buck on 16 March 2011, 01:17
I held the set up button down for over a minute on my RNS510* but coulnt get a firmware screen to appear :(
Title: Re: HOW TO: Check your version of RNS510
Post by: endy on 14 August 2011, 00:47
I held the set up button down for over a minute on my RNS510* but coulnt get a firmware screen to appear :(

im having the same problem.. can anyone help?
Title: Re: HOW TO: Check your version of RNS510
Post by: dieseldunc on 14 August 2011, 13:31
I think I've read elsewhere that this 'hidden screen' is only available on software above a certain version; which may explain why you can't get it if yours in an earlier one?
Title: Re: HOW TO: Check your version of RNS510
Post by: abynk on 14 August 2011, 14:08
I had the same problem on my VW rns510 ,
I just put a software for video in motion in it  from the link below. Now I am able to view my version by pressing and holding setup button. 
hxxp://www.4shared.com/get/DvmddJiM/VIM_Berto89.html
Title: Re: HOW TO: Check your version of RNS510
Post by: p3eps on 20 October 2011, 22:37
You can only get into it if the 'Setup Menu' option is enabled!
You can enable it with a VCDS... but using a VCDS you can see what version you're on anyway  :nerd: