GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: andc1 on 18 August 2009, 20:07
-
can anyone tell me what wheel bolts i have on my p plate anni? i need longer ones and i no where to get them from but there are so many different ones!
cheers all
-
Factory alloys are rounded taper and m14 size.
-
i got standard bbs anni wheels
-
i got standard bbs anni wheels
Yes they are from memory rounded taper and m14
-
cheers thanks alot
-
Ive got a spare full set if you need some?
-
longer ones?
-
why do you need longer bolts??
-
i have 20mm spacers to put on the back and the bolys and long enough
-
I will advise if you run 20mm spacers with the o.e 215 tryes they will rub the arches! (more so if low!) I ran 16mm spacers and had to fit 195 tryes to stop rubbing! (that was at -40mm too)
-
ok mate cheers
-
Are they 20mm each side, or 20mm in total, eg 10 each side?
I think Venom say that anything 10mm a side or over they supply longer bolts.
-
well ive lowered my anni 40mm but the back wheels seem tucked in, there 7j bbs anni wheels and just want em out a bit so what ya recon?
(http://i666.photobucket.com/albums/vv25/scoobygolf/CIMG3085.jpg)
-
Well spacers will sort that out.
Have you already bought the spacers? If so where from?
As most places give you the bolts if you need them.
Also if you have coilovers, take the front down about another 40mm :P haha
-
halfords jobbies!!!! its how the car is parked!
-
its not how the car is parked, i can see arch gap! haha.
Ok... Euro car parts can probably supply the bolts not sure though. If not maybe speak to venom motorsport.
Are they 10mm each side, 20mm in total.
Or 20mm each side, 40mm in total.
-
I will warn you now that Halfords spacers are not the best and can give vibration problems, much better to get the hubcentric ones.