GolfGTIforum.co.uk

General => Car audio => Topic started by: JIMMYBRODIE on 10 July 2015, 17:35

Title: RNS 510 stuck in Boot Loop
Post by: JIMMYBRODIE on 10 July 2015, 17:35

Hi my u it is stuck in boot loop after a firmware update.
I've got noting working, no camera, audio etc, I do have Dynaudio.

Can anyone help?

Title: Re: RNS 510 stuck in Boot Loop
Post by: JIMMYBRODIE on 10 July 2015, 18:13

Does anyone know of anyone in Berkshire with VCDS?

Title: Re: RNS 510 stuck in Boot Loop
Post by: th3_f15t on 31 October 2015, 13:29

I had a similar issue with my RCD510 with Dynaudio after some work on my car.

There are two things to try:

1.) Press the <, > and top right buttons and hold them for a few seconds. This can trigger a full reboot.

2.) Alternatively (which is what I did) press and hold the power button until the unit full reboots. This was what bought my unit back from the dead.

Hope this helps. :wink: