AFAIK...
Headlight washers and automatic levelling
Part 6.2.9. "Other requirements" says: "Dipped-beam headlamps with a light source or LED module(s) producing the principal dipped beam and having a total objective luminous flux which exceeds 2,000 lumen shall only be installed in conjunction with the installation of headlamp cleaning device(s) according to Regulation No. 45.”
Part 6.2.6.2.2 says "... devices which are adjusted manually, either continuously or non-continuously, shall be permitted, provided they have a stop position at which the lamps can be returned to the initial inclination defined in paragraph 6.2.6.1.1. by means of the usual adjusting screws or similar means. These manually adjustable devices shall be operable from the driver's seat."
However, part 6.2.9. says “With respect to vertical inclination the provisions of paragraph 6.2.6.2.2. above shall not be applied for dipped-beam headlamps:
(a) With LED module(s) producing the principal dipped beam; or
(b) With a light source producing the principal dipped beam and having an objective luminous flux which exceeds 2,000 lumen."
So, these laws say you must have washers and automatic levelling only if the light source is more than 2,000 lumens total output, or the light is produced by LEDs (of any brightness), according to (b), above.