GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Golf mk4 how to guides + info => Topic started by: dom on 29 April 2014, 20:58
-
Wazzzer came up with a solution for a set of adjustable drop links which include a ball joint and a rose joint to allow them to sit at a better angle than standard links, especially if running a TT/S3/LCR arb that goes under the driveshaft.
This is what you will be buying:
(http://i790.photobucket.com/albums/yy183/codling1234/Mobile%20Uploads/DSC_1296_zpssralrzni.jpg) (http://s790.photobucket.com/user/codling1234/media/Mobile%20Uploads/DSC_1296_zpssralrzni.jpg.html)
And this is what you will be making:
(http://i790.photobucket.com/albums/yy183/codling1234/Mobile%20Uploads/DSC_1295_zpstkb5vpzy.jpg) (http://s790.photobucket.com/user/codling1234/media/Mobile%20Uploads/DSC_1295_zpstkb5vpzy.jpg.html)
For one pair of drop links you need:
2 of these: http://www.ebay.co.uk/itm/320997544140?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
2 of these in LH thread to match the above: http://www.ebay.co.uk/itm/191085094424?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
2 of these: http://www.ebay.co.uk/itm/380444144576?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
and one pack of these: http://www.ebay.co.uk/itm/280505700707?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Total is £44ish
The rubber boot goes over the rose joint, which then screws to the ball joint. The misalignment spacers go outside the rubber boot, with the smallest face against the rose joint to allow for maximum movement.
When they are fitted they look like this (S3 arb pictured):
(http://i790.photobucket.com/albums/yy183/codling1234/Mobile%20Uploads/IMG_20140401_171145_zps5jcpdjsk.jpg) (http://s790.photobucket.com/user/codling1234/media/Mobile%20Uploads/IMG_20140401_171145_zps5jcpdjsk.jpg.html)
The only slightly fiddly bit is getting the rubber boot over the rose joint, I used this guide to help:
http://www.planetmx5.com/forum/viewtopic.php?t=2460 (http://www.planetmx5.com/forum/viewtopic.php?t=2460)
-
The misalignment spacers..... I'm confused as it says smallest face against the rose? Forgive me if I'm being a tit but they're the same size both sides?
-
The misalignment spacers..... I'm confused as it says smallest face against the rose? Forgive me if I'm being a tit but they're the same size both sides?
The face pointing upwards in the first picture is smaller.
-
Dom forgive me, but I'm still trying to work out how these spacers go? How can I rebuild the engine and not work this one out! I wish I wasn't spanish sometimes.......
-
They're conical shaped, as in the pic the surface not on the table goes against the rose bush. It gives them more range of movement
-
Ok I get it now! I guess it just seems more natural to put them the other way round :) thanks guys
-
Some of these parts are no longer on eBay, I fitted the above parts to the letter and after 6 months the joints had play in , looking to buy more I realised the ball joints are out of stock and have been for some time so looked for an alternative ,
Just ordered from mc Gill Motorsport their best joints made from Kevlar for similar money
Here's my shopping list and free postage
(http://i1119.photobucket.com/albums/k624/spudboy6/seat%20torpedo/53CD7A50-F975-4511-806E-CFC0909DCFEA_zpsqiidx98b.png) (http://s1119.photobucket.com/user/spudboy6/media/seat%20torpedo/53CD7A50-F975-4511-806E-CFC0909DCFEA_zpsqiidx98b.png.html)
(http://i1119.photobucket.com/albums/k624/spudboy6/seat%20torpedo/E483E32E-FBF5-4CAE-8231-D1809D324C27_zpsp9ybdswp.png) (http://s1119.photobucket.com/user/spudboy6/media/seat%20torpedo/E483E32E-FBF5-4CAE-8231-D1809D324C27_zpsp9ybdswp.png.html)
Will let you know how they feel once delivered