GolfGTIforum.co.uk
General => Shows, events, track days, motorsport => Topic started by: Toby on 12 March 2012, 13:28
-
if found some Avon ZZ-R track day tyres 255/40/17's for a spare set of alloy's iv got but i have 2 245/40/17's to go on the rar ( same alloy's)
would this matter? also would having them tyres get me any better times than using 18" road tyre's?
thank's
-
Sticky tyres will certainly help you get away faster.
Different size tyres won't matter as you're 2WD. On a 1/4 mile as long as the non-driven wheels have sound tyres on them they're just following the rest of your car around. Should be fine with the sticky boots on the front.
-
cool, hopefully ill win them on ebay... 4 day's left :laugh:
-
You'd be better off finding some part-worn slicks and there's some stuff you can apply that freshens them up. Can't remember the name of it right now.
-
These are new
-
Part-worn slicks will almost definitely be a LOT cheaper!
-
http://www.ebay.co.uk/itm/190650635323?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
thats them.
-
they not to wide ?? i run 225/445 17 and have dropped down to 215/45/17
-
although they are circuit slicks, same problem as the R888's you cannot get enough heat into them, even with a long ass burnout, the profile of the tyre is not gonna help you either, what you want is a fat tyre thats gonna crinkle when you let the pressure down, have you fitted some over size brakes or can you go to a smaller wheel,
-
Iv got 312mm so 17" will go over.
I think ill wait untill the right size turn up, on the 22nd ill be rolling on 18"
-
you want to order yourself some super soft tarmack rallye tyers idealy part worns then dose them with rubber softener repeatedly
* you may well snap a driveshaft tho as they don't really do spinning
-
pre-load the shafts and you should be fine,
check out mickey-thompson street tyres if your after a street strip tyre,
-
nobing about with some of the blokes i work with we've managed to brake shafts in some very intresting ways.
allways take up the slack before lanuching. but still managed to bust viryualy every part of the drivetrain at some point with supersofts.
even managed to twist a shaft
-
i managed to snap 2 outers and 1 inner on the same launch, Spools are silly things lol