Chaps - I'm not happy... VCDS seems to be a bit of a challange with the Mk.7. I have done a couple of things without an issue but most recently I am really struggling.
For example I set the indicator comfort blinks to 4 - command accepted - all OK, went back in to VCDS to check and there it is set at four. In practice - stil three blinks. Checked again - still shows 4.... WTF??
Nest job I tried was this:
1. Go to [09] Central Electronics
2. STG access permissions -> Function 16
3. Enter access code 31347
4. Go to adaptation channels (Function 10)
5. Select channel 1 - Select "Number of operations front windsceen wiper washer per SRA activation" (in German - Frontscheibenwischer Anzahl Betätigungen Frontwaschanlage pro SRA Aktivierung auswählen)
6. Adjust value to preference (no of times you can operate the windscreen washer stalk before the headlight washer activate).
7. Select channel 3, and adjust the activate time for folding the switch to enable headlight washers in the first place.
Again, abject failure - firstly using UK/English VCDS I entered the 31347 security code, all OK - but then could not find the adaptation channel - I know there must be 500 lines of commands but I could find nothing that looked right after scrolling up and down for ten minutes.
I then used Sootchuckers suggestion and tried German VCDS - surely enough there was the correct line "Frontscheibenwischer Anzahl Betätigungen Frontwaschanlage pro SRA Aktivierung auswählen"
But I could not get the security section (16) to accept the 31347 access code!
Never had issues with VCDS in year of Scirocco ownership - in fact if I had just got it for this car it would be going back to the supplier for a refund!
Any help gratefully received!
Thanks!