Passenger Door
1)Prise off the trim cover from around the grab handle
2) Remove the 2 brass coloured screws from inside the handle
3) undo the 3 torx screws from the bottom of the door card
4) remove the torx screw from the side near the inner part of the mirror
5) lift panel upwards
6) unclip the electrical connections to the window switch and door light
7)leave the door lever cable on and swing the door card out the way
drill out rivets,
9) Remove old speaker
10) Make sure you get all the rivet tails out of the door or they will rattle and annoy you
11) fit new speaker adapters I used Autoleads
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=27036068644012) Fit new speaker into adapters making sure connector plugs are in the recess
Test speakers before you fit the door card in case there is a problem
Refit Door card in reverse order of removal making sure the window is open to aid pushing the edge of the door card onto the clips
Big thanks to Dai-Cymru for this guide
PLease note - he and Golfgti accept no resposibility should you fook anything up