Ambient Lights - wiring

[Jeni_R_]

Would anyone be so kind in telling me where i access the wiring for the interior ambient lights so i can swap the ends round to make them red as per previous post couple years back Cebbes (no longer active) did this and it worked but i am unsure where to access the wiring i have manage to source the Haynes Manual for my car but its like reading swaheely and i cant find a direct link on it to the wiring

Anyone know where i should be looking ?

TIA

[I wanted a GTi]

Not sure but pretty sure that you would have to remove the door cards.

[Jeni_R_]

Not sure but pretty sure that you would have to remove the door cards.

great thanks i just needed to know that was the case thanks

[Jeni_R_]

Got doot card off but fkd if i know what cables to swap around theres 3 blue brown and a white goes into the ambient light socket not got a scooby so stuck it bak on again

Bollox 

[I wanted a GTi]

Got doot card off but fkd if i know what cables to swap around theres 3 blue brown and a white goes into the ambient light socket not got a scooby so stuck it bak on again

Bollox 

Brown and white I reckon.

[Jeni_R_]

Got doot card off but fkd if i know what cables to swap around theres 3 blue brown and a white goes into the ambient light socket not got a scooby so stuck it bak on again

Bollox 

Brown and white I reckon.

How do u remove the wires ? Do they pop out ?

[I wanted a GTi]

Got doot card off but fkd if i know what cables to swap around theres 3 blue brown and a white goes into the ambient light socket not got a scooby so stuck it bak on again

Bollox 

Brown and white I reckon.

How do u remove the wires ? Do they pop out ?

I haven't got a clue but I would think if they don't disconnect easily then I'd just cut them and strip back and swap them over.

[Jeni_R_]

Got doot card off but fkd if i know what cables to swap around theres 3 blue brown and a white goes into the ambient light socket not got a scooby so stuck it bak on again

Bollox 

Brown and white I reckon.

How do u remove the wires ? Do they pop out ?

I haven't got a clue but I would think if they don't disconnect easily then I'd just cut them and strip back and swap them over.

OK so NOWHERE shows what colpours to swap nor tells me what colour is what i gather

BROWN = LOAD
Blue = NEUTRAL

So what the hell is the white one ?

[GTD1414]

Can you post any pics of the wiring/pins?

From Cebbes post: Ambient lighting in Doors are led, so this has two connection pin 1 and pin 2.
So when you switch the kabel with pin 1 to pin 2 and pin 2 to pin 1 you will get red lights. yust reverse

[Jeni_R_]

Can you post any pics of the wiring/pins?

From Cebbes post: Ambient lighting in Doors are led, so this has two connection pin 1 and pin 2.
So when you switch the kabel with pin 1 to pin 2 and pin 2 to pin 1 you will get red lights. yust reverse

Below is the thread for someone fitting the emergency door light it shows the connections

http://www.golfmk7.com/forums/showthread.php?t=13887