10/08/06
Ok, this week i have mostly been starting the work on the rust to passenger side.
~ Cut all old rust and surrounding metal out
~ Fabricated new steel plates and welded them in
~ Grinded all new weld back, seam sealed, and wax oiled underside of inner wing
~ Removed rear bumpers and Toe-bar using grinder (bolds were rusted so badly!)
Then rebuilt my strut using my old Mk2 struts and springs.
(the Mk2 struts do fit but needed to modify the bottom holes to adjust the camber).
(Check out that Camber!)
Also bought and fitted:-
New CV Joints and Boots
Top Strut Mounts and Spring Cup plates
New Wheels Bearings for Front
This weekend im going to start the drivers side rust, and maybe remove the dash.