GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Golf mk2 how to guides + info => Topic started by: danny_p on 03 January 2011, 00:06

Title: What you need for an ABF conversion.
Post by: danny_p on 03 January 2011, 00:06

1 )Cabel Change, Cabel Clutch, EFI

ABF engine (any)
ABF gearbox (any)
ABF 02A starter motor.
02A frount mount ( any )
02A gear box mounting bracket ( seat- tolado / cordoba )
02A cabel clutch actuator ( seat cordoba / tolado ? )
02A cabel shifter assembly
ABF 02A clutch and flywheel
driveshafts with 100mm cv's

ABF ECU
ABF engine loom
Inductive loop pickup
Imobliser transponder box
RFID Key ( preflably paired to transponder box and ecu )

02A speedo sendor for cable speedo ( pn to follow )
speedo cable

Ideal bits to fit
G60 rear engine mount


2 )Cabel Change, hydralic Clutch, EFI

 
ABF engine (any)
ABF gearbox (any)
ABF 02A starter motor.
02A frount mount ( any )
02A gear box mounting bracket ( any )
02A clutch slave cyl
02A clutch master cyl
Hydralic clutch pipework
Brake fluid resovor for hydralic clutch
hydralic clutch pedal box
02A cabel shifter assembly
ABF 02A clutch and flywheel
driveshafts with 100mm cv's

ABF ECU
ABF engine loom
Inductive loop pickup
Imobliser transponder box
RFID Key ( preflably paired to transponder box and ecu )

02A speedo sendor for cable speedo ( pn to follow )
speedo cable

Ideal bits to fit
G60 rear engine mount

3 )rod change, Cabel Clutch, EFI

ABF engine (any)
ABF gearbox (any)
020 starter motor. ( diesel ideal, GTi will do )
020 frount mount bracket ( any )
020 gear box mounting bracket ( any )
020 clutch cable
020  shifter assembly and linkages
020 clutch and flywheel 210mm
driveshafts with 100mm cv's


ABF ECU
ABF engine loom
Inductive loop pickup
Imobliser transponder box
RFID Key ( preflably paired to transponder box and ecu )

020 speedo cable

Ideal bits to fit
G60 rear engine mount

4)  Rod change, Cabel clutch, mecanical injection (K-jetronic)

A SLAP WITH A BAT

Title: Re: What you need for an ABF conversion.
Post by: danny_p on 03 January 2011, 00:07

garanteed to have missed a few bit but off th etop o head thats what you need for ABF conversion

Title: Re: What you need for an ABF conversion.
Post by: tech1889 on 03 January 2011, 00:14

Danny your a star many thanks..

Title: Re: What you need for an ABF conversion.
Post by: dan_apps on 03 January 2011, 11:27

needs to be stickied as this does come up now and again! good work Danny :afro:

Title: Re: What you need for an ABF conversion.
Post by: Diamond Hell on 25 February 2011, 20:38

Quote from: danny_p on 03 January 2011, 00:06

02A speedo sendor for cable speedo ( pn to follow )
speedo cable

Passat Part 358957803G

Clutch actuation cable:

Seat Toledo ABF clutch cable for cable-change 'box with cable actuated clutch: 1L0721335G

Title: Re: What you need for an ABF conversion.
Post by: rich1977 on 07 June 2011, 23:48

so is there anything else needed if going from 8v diggi to 16v abf?

Title: Re: What you need for an ABF conversion.
Post by: Diamond Hell on 03 April 2013, 22:52

Finally found all the part numbers for the cable clutch set up for 02A

You need a mix of parts from Passats and SEATS, as follows:

Speedo cable: Passat Part 358957803G

Clutch actuation cable: Seat Toledo ABF clutch cable for cable-change 'box with cable actuated clutch: 1L0721335G

Lever arm actuator assembly from VW or SEAT 02A 141 708B

Boot for arm from VW or SEAT: 02A141728

Tensioning bracket to hold the end of the cable outer from B3 Passat: 357199356