Author Topic: mk3 1.8 problems  (Read 1152 times)

Offline carlos1.8driver

  • Just got here
  • *
  • Posts: 4
mk3 1.8 problems
« on: 26 March 2005, 16:48 »
I'm having problems with my 94 mk3 1.8. Started off cutting out on me sometimes at any speed.
Then got worse. Now its packed up on me and only starts once in the morning. First thoughts were the #30 ECU relay. But i looked in my fusebox and i don't seem to have one :huh:. I've checked the haynes manual and its not in the place it should be. Second row up. Third from left. In position 3.

Has anyone got a mk3 1.8 8v and can you confirm whether you have got one or not???

Would my car drive without it?

Offline madsingh

  • Not said much yet
  • **
  • Posts: 97
Re: mk3 1.8 problems
« Reply #1 on: 26 March 2005, 17:28 »
is it a driver or gti, if driver n with spi i could be air goin throught the spi, replace n should work find

Offline carlos1.8driver

  • Just got here
  • *
  • Posts: 4
Re: mk3 1.8 problems
« Reply #2 on: 26 March 2005, 18:11 »
hi, its a 1.8 8v driver with single point injection. It does start after its been left for at least a few hours. But when you try start it again it wont.

Offline madsingh

  • Not said much yet
  • **
  • Posts: 97
Re: mk3 1.8 problems
« Reply #3 on: 26 March 2005, 19:32 »
eres a link of me changin mine, http://www.eyewebsolutions.co.uk/phpBB2/viewtopic.php?t=2437&sid=02a817a3d80387bcaef37244944d15e9

im not sure though but if u can move it eay then it could be that as it was causing my car to stop

Offline carlos1.8driver

  • Just got here
  • *
  • Posts: 4
Re: mk3 1.8 problems
« Reply #4 on: 26 March 2005, 21:46 »
It could be that because mine looks a bit worse for wear. Where did you get that new part from?
How much?

But could it explain why the car will start after its being sat for at least 5 hours but then will not start again?

Also would you be able to check whether you have a no. 30 Ecu relay in position 3?