F17BAD G3 GTI. S3 TURBO

[F17BAD]

  like it

Also forgot to mention we Pollybushed the rear beam

gave it a refresh with paint too






Some pics of parts of the MTM kit

K24 7200 Hybrid





External waste gate and MTM Manifold

Going to refresh a few parts on the wastegate over the next few days :-)

[golf-sib]

What you doing with external wastegate, venting it out or back into the system?

[F17BAD]

Back into system as per MTM did i think..

not sure what is best ?

[F17BAD]

what do you mean ?  its direct bolt on kit for my engine

and believe it or not i actually have more room from the back of my engine to firewall than what the S3 does

the Charge pipe (that goes round the side of the engine) that came with the kit is a OEM item modified.. it gives more clearance and also removes the baffled part

the Downpipe is a 3" item.. I'm having a custom one done in same size but to suit my shell and no cat set up 

[RTechUK]

Boooosssst on its way   

[F17BAD]

it mounts the way it is in the picture, you can just see the top of the waste gate once its fitted, it is a tight fit, but it does go..

ill take lots of pics when we are fitting it.  

[Diamond Hell]

here is the Hotgolf Lightened and balanced flywheels next to the regular ABF one, he has machined this to suit Turbo car, which is a lot different to how he would do N/A types

Uh huh.

He took the weight off the flywheel in a different way to which he would for an NA engine?

You probably need to get some explanation on that, because grams and kilos are the same whether they're being driven by an NA motor, or a turbo motor.  

And the weight that's taken off is around the outside of the flywheel, last time I checked.

So you're out there wasting the competition on private strips yet can't make it to Inters and there's no photos or video of the car in motion?

Here's the solution.

http://www.rwyb.co.uk/dates.php

Look - there are dates all the way through til October.

[F17BAD]

Hotgolf asked me the power of the car and future plans of the power, i told him, he did the work to suit that.. Turbo car can spin it a lot faster than NA.. he said on a NA he would take as much weight off as possible

thats all i know.. if you wanna know more, ask him the reasons...

Also, would be a bit hard to get to inters when the car was in bits awaiting gearbox etc  

The car is not a track car or a show car.. it is a daily driver.

not sure what videos you would like to see.. if you was local id take you out in it... maybe then you would STFU

[tshirt2k]

Watch out Scene Police about!!

Could it be the First MTM kitted Mk3??

[F17BAD]

It will be the first according to MTM
As u know, Iv spoke to them today regarding my set up toask a few questions

All the S3's that were fitted with this set up were done in house and not many were done, it cost a staggering £6500 plus fitting
My kit is even rarer as it has the very sought after. K24 7200 hybrid turbo

@wolverline, the techical director says the Clearance with this kit versus the standard K04 set up is about the same, so I should have no issues (I hope)