GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: godsANGER on 02 April 2013, 11:00
-
Hiya all
Yestarday noticed my temp gauge wasn't working on my clocks after doing 40miles trip. So pluged in my wireless obd2 connector and used my torque app and the temp went up and sat at 80 on the app after the same trip.
Dose this sound like the clocks are fubar,d ? Still need to scan it but won't be able to do that till tonight.
Thanks Mike
-
littlebump
-
scan it.... or just test the display using vagcom!!!
-
scan it.... or just test the display using vagcom!!!
how do you test the display ?
-
Go into the module and there is an option to perform output tests
-
Go into the module and there is an option to perform output tests
Thanks ill give it a bash tonigth
-
tested the clocks in vcds and clocks work fine :grin:
(http://i19.photobucket.com/albums/b179/wallace1984uk/b61f9d22-caa7-4f2d-8e3c-97e22f1a8e03_zpseed8cb2d.jpg)
So just to double check going to stick the old temp sensor if can find it and test it.
Code from vcds
Control Module Part Number: 038 906 012 K
Component and/or Version: 1,9l R4 EDC 0000SG 2811
Software Coding: 00002
Work Shop Code: WSC 00028
1 Fault Found:
17664 - Engine Coolant Temp Sensor (G62): Open or Short to Plus
P1256 - 35-10 - - - Intermittent