BLOODY NIGHTMARE!!!
The new front bumper wouldnt fit!
Nobody tells you anything and there were no instructions with the kit, so I didnt know that the inner bumper was as deep as it is or that this was critical to the bumper fixing.
Basically what that means is the dimension from the top of the bumper down to the vented blocks must be 180mm.
It wasnt due to all the lovely filler and glassfibre and mesh that I spent hours fixing!
So I have had to grind ALL that off!
Also the two outer vent pods for want of a better word, were made too big. In that they made them too long coming out from the front.
So I ended up taking the mesh off both the 2 outer pods. grind it down, trial fit, grind down and shape, trial fit, final grind.
Then I still couldnt get the right space between the upper and mid pieces.
So i had to cut into the pods and bend them down.
Well now it will fit.
I have joined back up the cuts I made and left the resin to set well. This evening I will be putting new mesh back onto the side pods. Once that is set then 2moro evening I will be fitting it!
I do have some pics of all this but havent been arsed to even download them from the camera yet!