Author Topic: Worst case scenario please guys...  (Read 1416 times)

Offline HuwMk2

  • Here all the time
  • ****
  • Posts: 497
Worst case scenario please guys...
« on: 26 May 2009, 22:46 »
Hi. Seen a mk2 that I'm very tempted with, however, it needs some welding to the rear sills and arches. What would the welding and arches repaired/replaced including painting cost? Worst case scenario? Thanks.

Offline Thom89

  • Forum addict
  • *
  • Posts: 4,101
  • Looking for an "Icebreaker"
Re: Worst case scenario please guys...
« Reply #1 on: 26 May 2009, 23:53 »
You have just described a car that I would give a wide birth to!
£300/400 each side, should get you a reasonable job, painting only up to the first swage line..
Tom

Offline HuwMk2

  • Here all the time
  • ****
  • Posts: 497
Re: Worst case scenario please guys...
« Reply #2 on: 27 May 2009, 00:08 »
Here's the car:

http://www.golfgtiforum.co.uk/index.php?topic=117767.0

Surely a bargain even with the work needed?

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Worst case scenario please guys...
« Reply #3 on: 27 May 2009, 09:38 »
The biggest problem is you will find it is a lot worse once you start cutting it away, I would not consider it to be honest, you could be looking at £800 to £1000 to sort.

Offline Tramp

  • GTI forum regular
  • ***
  • Posts: 225
Re: Worst case scenario please guys...
« Reply #4 on: 30 May 2009, 19:40 »
NO NO NO.........

Offline deanpompey

  • I live here
  • *****
  • Posts: 512
Re: Worst case scenario please guys...
« Reply #5 on: 11 June 2009, 20:01 »
the answer is simple, if you can do it yourself or get it done cheaply, then why the hell not.
if you would be paying full price to get it done at a garage then dont even think about it.

Offline frybert

  • Here all the time
  • ****
  • Posts: 429
Re: Worst case scenario please guys...
« Reply #6 on: 12 June 2009, 22:03 »
yer i agree if your handy with a welder and dont mind spending abit of time on it then its a good project, most of the work aint rocket science it just requires allot of patience :smiley: