Mk8 GTD Lane assist

[daviegsxr]

Can anyone help with the procedure for turning off the lane assist permanently on my mk8 gtd.

The local  dealer wont do it and I have spoken to an independent garage and he has asked I get info from someone on the forum and it would take him a lot less time and save me money.

Any help would be appreciated.

Thanks.
David.

[Dave1rs]

Depends where you live,you need someone local with an OBDeleven. If your in Nottingham I can do it....but if not then you need to let people know where you are.

All the info needed is on the OBDeleven forum.

[daviegsxr]

Sorry, should have said, I’m in Ayrshire in Scotland.

The guy at the local garage had OBDeleven, but has that I try and get info to save time.

Thanks.
David.

[Dave1rs]

Here is the coding and process.

- Start ignition and turn off Lane Assist using button

- Pop the bonnet handle to release the bonnet (you do not need to raise the bonnet fully).
This is important otherwise the coding will not ‘write’ and you get a failed write message.

- Plug in OBDeleven dongle into one port (located underneath drivers right side trim)

- Turn ignition on (engine does not need to be running)

- Launch OBDeleven on phone

- Code as follows:

- go to A5 Driver Assistance control unit

-turn off sfd protection


- then Long coding tab


- scroll down to Configuration for lane departure warning Kl15

- Change from default ‘Activated’ to ‘Last Setting’

-Slide to write coding

- Coding accepted and default is now set to ‘Last setting’


- A few ignition starts to test and Lane Assist should now deactivated by default at ignition startup.



If he follows those steps it should work.

[daviegsxr]

Ideal, I will get the guy at the garage to try this and let you know how it goes.

Thanks.
David.

[Splashalot]

Here is the coding and process.

- Start ignition and turn off Lane Assist using button

- Pop the bonnet handle to release the bonnet (you do not need to raise the bonnet fully).
This is important otherwise the coding will not ‘write’ and you get a failed write message.

- Plug in OBDeleven dongle into one port (located underneath drivers right side trim)

- Turn ignition on (engine does not need to be running)

- Launch OBDeleven on phone

- Code as follows:

- go to A5 Driver Assistance control unit

-turn off sfd protection


- then Long coding tab


- scroll down to Configuration for lane departure warning Kl15

- Change from default ‘Activated’ to ‘Last Setting’

-Slide to write coding

- Coding accepted and default is now set to ‘Last setting’


- A few ignition starts to test and Lane Assist should now deactivated by default at ignition startup.



If he follows those steps it should work.

This forum needs a "thanks" button.

[JoeGTI]

All the info needed is on the OBDeleven forum.

Where's the OBDEleven forum? I am expecting a dongle in the post in the next day or two!

[fredgroves]

All the info needed is on the OBDeleven forum.

Where's the OBDEleven forum? I am expecting a dongle in the post in the next day or two!

https://forum.obdeleven.com/board/377/mk8

[JoeGTI]

All the info needed is on the OBDeleven forum.

Where's the OBDEleven forum? I am expecting a dongle in the post in the next day or two!

https://forum.obdeleven.com/board/377/mk8

Excellent, thanks Fred.

[valentino]

Do you think doing this would affect the warranty in any way?