GolfGTIforum.co.uk

General => The garage => Diagnostics - VagCom / VCDS => Topic started by: ED30_MLT on 08 October 2008, 08:34

Title: whats blocks need to use on VAGCOM ??
Post by: ED30_MLT on 08 October 2008, 08:34

Hi

I have vagcom which i used on my beloved mk4 Gti. Now I connected it on my ED30 , which are the usefull blocks I need to use now ??? and what are they for ??

Thanks

Title: Re: whats blocks need to use on VAGCOM ??
Post by: Rhyso on 08 October 2008, 08:52

need to look out for

MAF
Intake pressure

gives you an idea to see if your car is pulling the requested numbers

best thing to do is hook it up and idle the engine and run through the blocks to see what can be measured  :nerd:

Title: Re: whats blocks need to use on VAGCOM ??
Post by: neg on 08 October 2008, 10:47

115 for boost, requested vs actual
004 for AI Temp
002 for MAF readings
020 for Timing/CF's

Title: Re: whats blocks need to use on VAGCOM ??
Post by: Teutonic_Tamer on 08 October 2008, 14:27

Mods - move thread to the Maintenance and Info section - some good info here, which won't want to get lost in all the chaff!  :tongue:

Title: Re: whats blocks need to use on VAGCOM ??
Post by: Rhyso on 08 October 2008, 14:34

Quote from: Teutonic_Tamer on 08 October 2008, 14:27

Mods - move thread to the Maintenance and Info section - some good info here, which won't want to get lost in all the chaff!  :tongue:

well they'll just have to find their way here - its useful for other models too  :tongue:

Title: Re: whats blocks need to use on VAGCOM ??
Post by: iMation on 08 October 2008, 16:12

i think im gonna log some A/F and Maf tonight