GolfGTIforum.co.uk
Model specific boards => Golf mk1 => Topic started by: Mk1king on 28 January 2015, 05:25
-
I'm really looking for some technical support I have a mk1 85 rabbit gti & I recently put a 92 digifant engine in & wired I have spark & fuel cuz I wired the coil and hooked up a external fuel pump so I'm getting fuel & spark but there is a 5 wire clip close to the ecu does anyone out there know where do I go from here I'm almost done I'm just not familiar with this setup I'll post up pics soon of my progress I have intake headers 268 cam & head is port & polished with ARP head studs please if anyone can help Ireally aappreciate it here is my email if u wanna contact me personally litlpmp420@gmail.com
THANK YOU
-
What a first post. Welcome to the forum, I can't help you though as I have no idea what you just said. :undecided:
-
I have a 92 digifant engine how do I wire it to my 85 gti rabbit I have wire loom and ecu
-
A chap named 'Rubjonny' was always a guru for this kind of thing, whilst there is probably folk on here that can give you a walkthrough (and ask the right questions) here is a link to rubjonnys previous discussions on the subject after a quick google. The first is a discussion about a caddy...
http://www.clubgti.com/showthread.php?242010-Wiring-8v-Digifant-into-Mk1-Caddy
and the second is link is from a chap called Tyegti and may be usefull
http://forums.thecarlounge.com/showthread.php?7022046-Digifant-II-into-Early-MK1-Fuse-Panel
Let us know how you get on, it may be worth starting a project thread with loads of pics on as it helps a lot when using forums (figuring out and spottting what's wrong etc)
Peace
-
Innit bruv