Model specific boards > Golf mk3

rear veiw mirror removal mk3 gti

<< < (2/2)

carl:
ive heated the thing up until i could not touch it ,tried a blade on it ,i cant believe how hard the thing is stuck on ,if anybody can get the thing off there car without breaking the screen i will give you a tenner,
ive given up ,
ive lost to some stupid glue,

Bazzer:
ElsaWin says to use the special glue remover, see below for the text.... Maybe ask a VW Stealership if they can get some?

Interior mirror
Repair method with glass-metal adhesive
Materials:

◆ Glass-metal adhesive kit D 000 703 A1
 
 
 
→ Tools:

    1 -    Glass scraper (commercially available)
    2 -    Blade (commercially available)
‒ Take mirror plate out from mirror base.
‒ Remove PUR adhesive from mirror plate with wire brush.
‒ Grind off three spacer protrusions on bonding surface. To do this, use sandpaper (360/400 grain) on flat surface.
‒ Keep sanded surface clean and free of grease.
‒ Scrape down PUR adhesive material and primer down to ceramic layer on windscreen using glass scraper.
‒ Clean bonding area with adhesive remover D 002 000 10 or cleaning solution D 009 401 04.
Warning!
Do not damage ceramic coating. Scratches will remain permanently visible.
‒ Cut nylon mesh fabric exactly to the size of the mirror base.
Note:

Wear hand protection (rubber glove).

‒ Apply adhesive evenly and smoothly to base of mirror.
‒ Fit nylon mesh fabric onto base of mirror.
‒ Apply further adhesive to nylon mesh fabric by dabbing with the tube.
30 seconds are available for applying the adhesive to the nylon mesh fabric until pressing it onto the windscreen.

‒ Press base of mirror firmly (do not use force) against windscreen for 15 seconds.
‒ Remove excess adhesive with a cloth.
Note:

Inside mirror can be fitted again after 15 minutes.
 

Navigation

[0] Message Index

[*] Previous page