Author Topic: can a AGU engine run at 350bhp with standard internals??  (Read 18337 times)

Offline mk4_gti

  • Not said much yet
  • **
  • Posts: 56
as above...??

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,056
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #1 on: 11 October 2011, 10:00 »
Short answer = no

Going to need uprating  :smiley:
Quote from: Diamond Hell
You suck at buying cars, please take the pointy D hat from Wayne and go sit in the corner.

Offline MaXXeH

  • I live here
  • *****
  • Posts: 1,528
  • Golf MK5 GTI
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #2 on: 11 October 2011, 12:32 »
think the max is around 300-320.  you just need rods.

Offline mk4_gti

  • Not said much yet
  • **
  • Posts: 56
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #3 on: 11 October 2011, 13:43 »
just need rods yea ok well need to have a quick think about those......hmmmmm......yea mite just do that ;)

Offline daz veedub

  • Forum addict
  • *
  • Posts: 5,549
  • Operation 1.8t bolf
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #4 on: 11 October 2011, 13:45 »
just need rods yea ok well need to have a quick think about those......hmmmmm......yea mite just do that ;)

that was a quick think  :grin:

Offline mk4_gti

  • Not said much yet
  • **
  • Posts: 56
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #5 on: 11 October 2011, 13:48 »
my friend i want more power than 150bhp

Offline tshirt2k

  • I live here
  • *****
  • Posts: 1,323
  • Been there...Done that...
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #6 on: 11 October 2011, 13:55 »
my friend i want more power than 150bhp


a remap will give you more than near 200hp. Have you tried that?


Mk3 ABF 16VT Megasquirt V3

Tshirt knows........ How to diagnose

Offline Sammie-GTI

  • GTI forum regular
  • ***
  • Posts: 247
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #7 on: 11 October 2011, 14:02 »
you can run the agu on 350bhp, its been done but its just a matter of time before the rods bend

Offline shaft69

  • I live here
  • *****
  • Posts: 1,793
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #8 on: 11 October 2011, 18:34 »
I know birchy who built twin engine golfs built the polo with AGU in rear at 340bhp no internal mods.
MK4 1.8t bored/stroked 2.0lt AEG crank, 83mm supertech pistons, intergrated rods, ACL race brgs, Flowed large port head, Supertech valves, All ARP bolts, GTX2871r turbo, Tial wastegate, 3" pipewerx dp, REVO stage 3 tune, Direct port water meth, MORE TO COME!!! Ready to go racing
Owner of bndynamix ltd. BMW and mini specialist
184 Wallgate, Wigan
WN3 4AL
07966492823.

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,056
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #9 on: 11 October 2011, 20:34 »
my friend i want more power than 150bhp


Remap it to 200 and see what you think. :smiley:
Quote from: Diamond Hell
You suck at buying cars, please take the pointy D hat from Wayne and go sit in the corner.