Got crank sensor fitted but still wont start so i started checking all earths but couldnt find nothing wrong so i got another ecu from the breakers to try but still nothing. I was getting a bit annoyed now, and the only thing left was the wiring loom.
The next weekend i thought right were do i start, looking at the loom all taped up i thought to myself inside first! Stripped out clocks an a bit more of the dash to inspect the loom, all was ok so went to the fusebox again and i found a connector from the old immobiliser that wasnt 100% great so redone this i also changed 1 remaining relay on top of the fusebox (53 i think) not sure what its for but change it anyway.
Jump leads on and it started, couldnt believe it so chuffed its unreal, not to mention im a plumber not a mechanic.
Glory was short lived when it cut out 20mins later and wouldnt start again, so i left it an hour and tried it again and it started no probs but cut out again. At first i thought fuel pump relay but then after some advice i Ordered another Crank sensor.
Next job was the interior rebuild which i wasnt looking forward to. I got a new headling as the mould wouldnt come off and also some less saturated sound deadning for under the carpet. 4 hours it took which i thought was not bad at all
Polo gear Knob