Author Topic: ???modifying non injection mk2  (Read 3357 times)

Offline cmg

  • Just got here
  • *
  • Posts: 2
???modifying non injection mk2
« on: 02 May 2003, 03:37 »
???can anyone tell me how i can increase power + response from my 1.6 driver mk2 (can't afford the insurance premium on a GTI )
« Last Edit: 01 January 1970, 01:00 by 1055631600 »

Offline tinman

  • I live here
  • *****
  • Posts: 1,229
Re:  ???modifying non injection mk2
« Reply #1 on: 04 May 2003, 02:41 »
I really don't want to be a kill joy, but if you make modifications to the car, especially in regards to its performance, you have to disclose it to your insurance company.

So you probably wouldn't be any better off.

And if you accidently have a crash, and the insurance investigator goes "hmm, did a Driver really come with those turbos" you may end up in a sticky situation.

Sorry,

Justin Clements
« Last Edit: 01 January 1970, 01:00 by 1055631600 »

Offline mk2driva

  • Not said much yet
  • **
  • Posts: 33
Re:  ???modifying non injection mk2
« Reply #2 on: 05 May 2003, 00:52 »
i think by putting a gti exhuast system (4-2-1 manifold) it adds a couple of bhp as well as a nice sound. Im going to be putting a Webber carburettor on mine in the summer which will improve the running of the engine and should make a difference to the acceleration (so ive been told). ??? Apart from that im not sure what else would improve it. :-/
« Last Edit: 01 January 1970, 01:00 by 1055631600 »

franmav4

  • Guest
Re:  ???modifying non injection mk2
« Reply #3 on: 16 May 2003, 19:11 »
I used to have a 1.8 Carb GL.  I replaced the Pierburg with a Weber.  I also fitted an original GTi exhaust and a K&N panel.  I also had a GTi oil cooler and GTi rear disk conversion from a Jetta Gt.   It felt a little more torquey at the low revs. I added a road Kent Cam and lost a bit on the bottom end but you could feel it pull more at the higher revs, but not much.

Other mods included the Gti front disks and Weitec Coilovers.  15" Chrome Clipper wheels.  90 Spec arches and bumpers, mattig rear spoiler and SWG twin headlight grill and deep spoiler and colourcoded items.  It was really nice for a metalic gold golf GL and the Ecotek.  GTi Steering wheel etc.

Since then I had a GTi and now a 16v, but I wished at the time I just put Twin Weber 40's on the GL with port and polishing as the engine is similar to the GTi 8v, with a Gti 4y gearbox and drive shafts and 16v Brakes.

F
« Last Edit: 01 January 1970, 01:00 by 1055631600 »

Offline richandhazel

  • Global Moderator
  • Forum addict
  • *****
  • Posts: 4,465
Re: ????modifying non injection mk2
« Reply #4 on: 20 May 2003, 17:00 »
You can do a lot worse than puting Webers on.......much better carb.......I think I saw one for sale in the 'Parts for sale' section.
« Last Edit: 01 January 1970, 01:00 by -1 »