Is this dump valve installed correctly?

[MoMartin]

I've just bought an agu golf 1.8t, and have noticed that there are a few minor problems with it, and as the  dump valve is one of the few modifications on it, I thought it may be contributing to the problem. The problem is that the turbo sometimes lags / the engine holds back when using the throttle.





Cheers, Mo

[sharki786]

Images aint showing.

[james2]

I would get a forge one fitted on your car.

[northeast_gti-t]

Also check it over for any fault codes etc then you can start sorting out where your issue lies.

[Nino]

Looks luke the dv is installed reversed. A few people do this for louder tssssh the blue piping looks like n249 bypass

[MoMartin]

Images aint showing.

Fixed

Also check it over for any fault codes etc then you can start sorting out where your issue lies.

I'm getting it checked this tuesday, i will report back then, if i Can't find and fix the problem.

Thanks, Mo

[rockmonkey69]

It looks fine, with regards to the orientation I've contacted Forge about this and they claim their diverter valves are designed to operate fine regardless which way it is fitted. I have installed mine with the bottom of the diverter valve connected to the charge pipe too, but I might switch it around for aesthetics.

[dom]

I'm pretty sure mine is fitted the other way around

[rio_gti]

Wonder what's hiding under the bit if black tape?!!!

[northeast_gti-t]

I'm pretty sure mine is fitted the other way around

mine is also fitted the other way round i was led to believe this to be the correct orentation.