Author Topic: can a AGU engine run at 350bhp with standard internals??  (Read 24304 times)

Offline golf-sib

  • I live here
  • *****
  • Posts: 1,683
  • Турботазик
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #40 on: 14 October 2011, 21:42 »
Any dyno is a lottery, your figures will vary from time of day to time of year, that is a k03s on an AGU... he's got:
63.5mm exhaust
1.8 NA camshaft
large injectors
Forge cold air intake
Forge actuator (blue spring)
Stock K03s turbo
4bar FPR
Larger MAF
FMIC

Tested on Maha dyno, 100octane fuel, 25degree advance... and it's in a polo.


Audi TT - K04 TFSI Hybrid - 325BHP
VW Golf - k03 AGU - 200BHP

1.8T AGU..
R135
╚╬╬╝
  24


My Chinese Bike project: http://xtrsproject.wordpress.com/

Offline tshirt2k

  • I live here
  • *****
  • Posts: 1,323
  • Been there...Done that...
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #41 on: 14 October 2011, 21:57 »
If that's the case, there wasn't much point putting up that dyno plot, as it's outside the scope for the the everyday owner. Anything that can delay the onset of det, will give higher outputs. You could also add a 50hp shot of nitrous and get the same result.


Mk3 ABF 16VT Megasquirt V3

Tshirt knows........ How to diagnose

Offline Dave_IOW

  • Forum addict
  • *
  • Posts: 4,684
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #42 on: 14 October 2011, 21:59 »
Its still on a KO3s and proven, you could add water injection and get some advance.

Its possible..
Project: Mk2 20vT trackslag
Daily: Mk2 GTI typ19

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,175
  • Golf GTI 1.8T AGU
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #43 on: 14 October 2011, 23:41 »
We'll see what Chris gets out of a K03s on Wednesday


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175

Offline +49

  • Here all the time
  • ****
  • Posts: 265
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #44 on: 18 October 2011, 14:53 »
What i'm more interested in wen its comes to AGU/k03s combos is why ppls torque figures differ so much so very similar setups?

theres loads of 220-230 BHPS once but have 250-60ft lb of torque? Then some with 238bhp only have 235-240 fl lbs? is the the dyno? different tuners? Just luck?

Rtech seems to get very high torqure figures? Is is it just cos he's the bollox?  :grin: :wink:


Offline piperrs

  • Not said much yet
  • **
  • Posts: 14
  • Piperexhausts.co.uk
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #45 on: 18 October 2011, 15:01 »
My K03S AUM made 230BHP 265 ft/lb at AMD.



Tel - 01303 245 300
Fax - 01303 240 666

Email - sales@pipercams.co.uk

Offline +49

  • Here all the time
  • ****
  • Posts: 265
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #46 on: 18 October 2011, 15:05 »
My K03S AUM made 230BHP 265 ft/lb at AMD.

for instance these fitures? 265ft lbs?!?!




Offline Sammie-GTI

  • GTI forum regular
  • ***
  • Posts: 247
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #47 on: 18 October 2011, 20:56 »
wasn't there someone in golf+ who ran 247bhp 285lbft with agu ko3s? :shocked:

Offline Chris.

  • I live here
  • *****
  • Posts: 1,916
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #48 on: 19 October 2011, 00:32 »
Sooooo many things to think about really.

Ill see what mine gets in the morning with the following:

k03s
AGU (recently rebuilt
3" decat downpipe
2.5" cat back to remus backbox with no center silencer
forge actuator (yellow)
forge 007p (yellow)
forge TIP
New N75 I think its a 'E'
2.75" ID MAF
Pipercross panel filter in stock oem smoothed airbox with 3" cold air feed
THS FMIC
calibra yellow injectors

No cams or anything else internally (its a stock AGU block with k03s) with just about every bolt on going :|

Looking at getting into the 240s

ran a 238 whilst lean last time on the dyno with stock maf and injectors.

Click For Build Thread

248bhp  278lbft R - Tech Powered 1.8T!!  - Gone but NOT forgotton

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,175
  • Golf GTI 1.8T AGU
Re: can a AGU engine run at 350bhp with standard internals??
« Reply #49 on: 19 October 2011, 12:48 »
How you done so far Chris? Only thing I'll have different to you is a 2.5" decat rather than a 3"


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175