Please be aware that these items are NOT a straight forward easy 100% fit!!
They were designed for the Audi RS3 FL (2017->) which has 375mm discs with 8 piston monoblock callipers & aluminium wishbones.
We have smaller discs & pressed steel wishbones, & therefore these items have to be modified to properly fit our wishbones..then a degree of modification is required to stop interference between the calliper & duct on full steering lock & full suspension droop (wheels in air).
I have GTI/GTD 312mm discs & VW factory sports suspension (-15mm) & these items interfered with wheels on ground at 3/4 to full lock each side....2/3 locks wheels in air. If you have differnt brakes & suspension you will have to modify more or less for the calliper to duct interferrence issue...
I am more concerned because if you have an inspection etc. (in UK we have MOT each year for cars over 3yrs old) & they see a cable tied part to the wishbones (alarm bells may ring) with the car in the air on a two post lift (so wheels at full drop), & that the brake callipers hit the this duct which stops you from getting full steering lock....FAIL
Also ditch the thin 7.6mm wide cable ties supplied & use 9mm wide ones....looks way more OEM...
I did a "how" to guide here:-
https://www.golfmk7.com/forums/showthread.php?t=41323