Author Topic: catch can install  (Read 22035 times)

Offline daz veedub

  • Forum addict
  • *
  • Posts: 5,540
  • Operation 1.8t bolf
Re: catch can install
« Reply #110 on: 15 May 2011, 19:01 »
no neither can i and to be honest is it worth it?! cant tell any differance only a load of old sh.t in a pot!!!!

ya just answered that 1 yaself mate  :wink:

Offline symsymma

  • I live here
  • *****
  • Posts: 854
  • AGU POWER,drive it like u stole it!!!
Re: catch can install
« Reply #111 on: 15 May 2011, 19:04 »
If ur catchin something its workin mate!all ur catchin would b goin bk into turbo and through intercooler etc.ive emptied mine twice now aint had loads either.sign of a good engine.did u leave hockey puck inline? :cool:
1.8T AGU 203bhp & 233lb/ft Rtech stage 1 custom remap,18"dezentz rims,lowered 40mm shocks n springs,whiteline 24mm adj rear arb,lcr axle bushes,polybushed arb,modified front bumper & valences,depo projector headlights,delocked,wrapped interior&bora gear knob,forge boost & coolant hoses,forge tip,forge 007p,samco vac hoses,simota aeroform cai,saiko michi catch can,deleted pcv system,r32 dogbone,miltek lg bore down pipe & sports cat/non res anni style system.

Offline andc1

  • I live here
  • *****
  • Posts: 1,939
Re: catch can install
« Reply #112 on: 15 May 2011, 19:14 »
nope binned all that, struggled to find space for the can tho

Offline symsymma

  • I live here
  • *****
  • Posts: 854
  • AGU POWER,drive it like u stole it!!!
Re: catch can install
« Reply #113 on: 15 May 2011, 19:43 »
Where did you mount urs in the end?got any pics.r tech advised me to keep the puc on the tip inline :undecided:
1.8T AGU 203bhp & 233lb/ft Rtech stage 1 custom remap,18"dezentz rims,lowered 40mm shocks n springs,whiteline 24mm adj rear arb,lcr axle bushes,polybushed arb,modified front bumper & valences,depo projector headlights,delocked,wrapped interior&bora gear knob,forge boost & coolant hoses,forge tip,forge 007p,samco vac hoses,simota aeroform cai,saiko michi catch can,deleted pcv system,r32 dogbone,miltek lg bore down pipe & sports cat/non res anni style system.

Offline andc1

  • I live here
  • *****
  • Posts: 1,939
Re: catch can install
« Reply #114 on: 15 May 2011, 20:02 »
mine snapped when i took it out


Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: catch can install
« Reply #115 on: 15 May 2011, 20:08 »
Is a catch can worth fitting on a 1.8t  :undecided: :undecided:

Offline symsymma

  • I live here
  • *****
  • Posts: 854
  • AGU POWER,drive it like u stole it!!!
Re: catch can install
« Reply #116 on: 15 May 2011, 20:08 »
Nice install mate nice and neat.couldnt mount mine anywhere round there cos of me cai.that bung all ok then. :smiley:
1.8T AGU 203bhp & 233lb/ft Rtech stage 1 custom remap,18"dezentz rims,lowered 40mm shocks n springs,whiteline 24mm adj rear arb,lcr axle bushes,polybushed arb,modified front bumper & valences,depo projector headlights,delocked,wrapped interior&bora gear knob,forge boost & coolant hoses,forge tip,forge 007p,samco vac hoses,simota aeroform cai,saiko michi catch can,deleted pcv system,r32 dogbone,miltek lg bore down pipe & sports cat/non res anni style system.

Offline andc1

  • I live here
  • *****
  • Posts: 1,939
Re: catch can install
« Reply #117 on: 15 May 2011, 20:09 »
i find no differance but apparently yes  :undecided:

Offline symsymma

  • I live here
  • *****
  • Posts: 854
  • AGU POWER,drive it like u stole it!!!
Re: catch can install
« Reply #118 on: 15 May 2011, 20:10 »
Is a catch can worth fitting on a 1.8t  :undecided: :undecided:
why woulnt it be? For me it was all about symplifying and removing pcv system and prone to splitting pipes etc. :smiley:
« Last Edit: 15 May 2011, 20:12 by symsymma »
1.8T AGU 203bhp & 233lb/ft Rtech stage 1 custom remap,18"dezentz rims,lowered 40mm shocks n springs,whiteline 24mm adj rear arb,lcr axle bushes,polybushed arb,modified front bumper & valences,depo projector headlights,delocked,wrapped interior&bora gear knob,forge boost & coolant hoses,forge tip,forge 007p,samco vac hoses,simota aeroform cai,saiko michi catch can,deleted pcv system,r32 dogbone,miltek lg bore down pipe & sports cat/non res anni style system.

Offline andc1

  • I live here
  • *****
  • Posts: 1,939
Re: catch can install
« Reply #119 on: 15 May 2011, 20:11 »
yea cheers mate bunged up the pipe nicely, i didnt need to take the elbow off either as i managed to attached the pipe with it still on!!