Disconneting The Airbag

[zdebx]

How do you disconnect the bloddy thing from the plug?

You have to remove the indicator stalk, right? I removed all 3 flat-head screws, but still couldn't take out the stalk...

What's the magic?

[adi]

do you just remove the steering wheel, and swap to standard?

[zdebx]

do you just remove the steering wheel, and swap to standard?

Yes, mate. Couldn't disconnect the airbag wire from the plug to remove the steering wheel.

I can't figure out how to remove that indicator stalk.

[adi]

dose it not just unplug from the back of the airbag itself. there are 2 torx holding the airbag to the steering wheel i just removed this and unpluged it from the airbag itself.

[zdebx]

dose it not just unplug from the back of the airbag itself. there are 2 torx holding the airbag to the steering wheel i just removed this and unpluged it from the airbag itself.

I've done that and removed the airbag, but I need to unplug the wire, which is attached to the steering wheel, otherwise I can't remove it completely, even after undoing the 24mm nut.

The bit that I'm confused about is how to remove the bloddy stalks.

[adi]

i think you just remove the two screws at the top near the hazard switch and just pull it off.http://www.edition38.com/forums/index.php?showtopic=174698 just found this link dont know wether it will help.

[zdebx]

i think you just remove the two screws at the top near the hazard switch and just pull it off.http://www.edition38.com/forums/index.php?showtopic=174698 just found this link dont know wether it will help.

Thank you SO MUCH for the link, mate.

That's exactly what I needed. I didn't know there are 2 more screws underneath...I was wondering why the fcuk it wasn't coming off, lol

Will try it tomorrow.